EDP Sciences logo
Subscriber Authentication Point
Search
Menu
Home All issues Volume 105 / No 4 (2017) Matériaux & Techniques, 105 4 (2017) 402 References
Open Access
Issue
Matériaux & Techniques
Volume 105, Number 4, 2017
Article Number 402
Number of page(s) 14
Section Vieillissement et durabilité / Ageing and durability
DOI https://doi.org/10.1051/mattech/2018006
Published online 19 March 2018
  1. S. Carroccio, C. Puglisi, G. Montaudo, New vistas in polymer degradation. thermal oxidation processes in Poly(ether imide), Macromolecules 38, 6849 (2005) [CrossRef] [Google Scholar]
  2. A. Rivaton, Recent advances in bisphenol-A polycarbonate photodegradation, Polym. Degrad. Stab. 49, 163 (1995) [CrossRef] [Google Scholar]
  3. S. Collin, P.O. Bussière, S. Thérias, J.M. Lambert, J. Perdereau, J.L. Gardette, Physicochemical and mechanical impacts of photo-ageing on bisphenol a polycarbonate, Polym. Degrad. Stab. 97, 2284 (2012) [CrossRef] [Google Scholar]
  4. A. Rivaton, B. Mailhot, J. Soulestin, H. Varghese, J.L. Gardette, Comparison of the photochemical and thermal degradation of bisphenol-A polycarbonate and trimethylcyclohexane-polycarbonate, Polym. Degrad. Stab. 75, 17 (2002) [CrossRef] [Google Scholar]
  5. S. Kuroda, I. Mita, Degradation of aromatic polymers—II. The crosslinking during thermal and thermo-oxidative degradation of a polyimide, Eur. Polym. J. 25, 611 (1989) [Google Scholar]
  6. M.A. Corres, M. Zubitur, M. Cortazar, A. Múgica, Thermal and thermo-oxidative degradation of poly(hydroxy ether of bisphenol-A) studied by TGA/FTIR and TGA/MS, J. Anal. Appl. Pyrolysis 92, 407 (2011) [CrossRef] [Google Scholar]
  7. S. Carroccio, C. Puglisi, G. Montaudo, Thermal degradation mechanisms of polyetherimide investigated by direct pyrolysis mass spectrometry, Macromol. Chem. Phys. 200, 2345 (1999) [CrossRef] [Google Scholar]
  8. G. Lisa, C. Hamciuc, E. Hamciuc, N. Tudorachi, Thermal and thermo-oxidative stability and probable degradation mechanism of some polyetherimides, J. Anal. Appl. Pyrolysis 118, 144 (2016) [CrossRef] [Google Scholar]
  9. H. Farong, W. Xueqiu, L. Shijin, The thermal stability of polyetherimide, Polym. Degrad. Stab. 18, 247 (1987) [CrossRef] [Google Scholar]
  10. R.A. Dine-Hart, D.B.V. Parker, W.W. Wright, Oxidative degradation of a polyimide film: I. Initial studies, Br. Polym. J. 3, 222 (1971) [Google Scholar]
  11. L. Augh, J.W. Gillespie, B.K. Fink, Degradation of continuous carbon fiber reinforced polyetherimide composites during induction heating, J. Thermoplast. Compos. Mater. 14, 96 (2001) [CrossRef] [Google Scholar]
  12. S. Commereuc, D. Vaillant, J.L. Philippart, J. Lacoste, J. Lemaire, D.J. Carlsson, Photo and thermal decomposition of iPP hydroperoxides, Polym. Degrad. Stab. 57, 175 (1997) [CrossRef] [Google Scholar]
  13. D.J. Carlsson, R. Brousseau, D.M. Wiles, Reactions of sulfur dioxide with oxidized polyolefins, Polym. Degrad. Stab. 15, 67 (1986) [CrossRef] [Google Scholar]
  14. V.A. Matyshak, O.V. Krylov, Problems of quantitative spectroscopic measurements in heterogeneous catalysis: molar absorption coefficients of vibrations in adsorbed substances, Kinet. Catal. 43, 391 (2002) [CrossRef] [Google Scholar]
  15. T. Iqbal, B.J. Briscoe, P.F. Luckham, Surface plasticization of Poly(ether ether ketone), Eur. Polym. J. 47, 2244 (2011) [CrossRef] [Google Scholar]
  16. W.C. Oliver, G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res. 7, 1564 (1992) [NASA ADS] [CrossRef] [Google Scholar]
  17. P. Clément, Détermination des propriétés mécaniques de céramiques poreuses par essais de microindentation instrumentée sphérique, Thèse de doctorat, INSA Lyon, 2013 [Google Scholar]
  18. J.G. Calvert, J.N. Pitts, Photochemistry, Wiley, New York, 1966 [Google Scholar]
  19. X. Colin, L. Audouin, J. Verdu, Determination of thermal oxidation rate constants by an inverse method. Application to polyethylene, Polym. Degrad. Stab. 86, 309 (2004) [CrossRef] [Google Scholar]
  20. T.G. Fox, P.J. Flory, Second-order transition temperatures and related properties of polystyrene. I. Influence of molecular weight, J. Appl. Phys. 21, 581 (1950) [CrossRef] [Google Scholar]
  21. J. Bicerano, Prediction of polymer properties, 3rd ed, Marcel Dekker, New York, 2002 [CrossRef] [Google Scholar]
  22. R. Simha, R.F. Boyer, On a general relation involving the glass temperature and coefficients of expansion of polymers, J. Chem. Phys. 37(5), 1003 (1962) [CrossRef] [Google Scholar]
  23. E. Richaud, P. Ferreira, L. Audouin, X. Colin, J. Verdu, C. Monchy-Leroy, Radiochemical ageing of poly(ether ether ketone), Eur. Polym. J. 46, 731 (2010) [CrossRef] [Google Scholar]
  24. D.G. Gilbert, M.F. Ashby, P.W.R. Beaumont, Modulus-maps for amorphous polymers, J. Mater. Sci., 21 3194 (2015) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.