EDP Sciences logo
Subscriber Authentication Point
Search
Menu
Home All issues Volume 111 / No 4 (2023) Matériaux & Techniques, 111 4 (2023) 404 References
Issue
Matériaux & Techniques
Volume 111, Number 4, 2023
Special Issue on ‘Indentation advances in experiments and modelling’, edited by Florian Lacroix, Olga Smerdova and Eric Le Bourhis
Article Number 404
Number of page(s) 16
Section Joining and assembly
DOI https://doi.org/10.1051/mattech/2023034
Published online 19 December 2023
  1. M. Saranik, L. Jézéquel, D. Lenoir, Experimental and numerical study for fatigue life prediction of bolted connection, Proc. Eng. 66, 354–368 (2013) [CrossRef] [Google Scholar]
  2. EN 1993-1-8 - Eurocode 3: Design of steel structures - Part 1-8: Design of joints, European Standard, vol. 33, pp. 1-135 (2005) [Google Scholar]
  3. P. Zoetemeijer, A design method for the tension side of statically loaded, Bolted beam-to-column connections, HERON, vol. 20, pp.1- 59 (1974) [Google Scholar]
  4. Z. Al Khatab, Analyse de comportement des assemblages métalliques renforcés par contre-plaques - approche numérique et validation expérimentale. Thèse, Université Blaise Pascal - clermont II, pp. 1-280 (2003) [Google Scholar]
  5. A. Abidelah, A. Bouchaïr, D.E. Kerdal, Influence of the flexural rigidity of the bolt on the behavior of the T-stub steel connection, Eng. Struct. 81, 181–194 (2014) [CrossRef] [Google Scholar]
  6. C.P. Chasten, Theoretical modeling and testing of 8 − bolt extended end-plate connections. Thesis, pp. 1–63 (1988) [Google Scholar]
  7. L.M. Bezerra, C.S. De Freitas, W.T. Matias et al., Evaluación numérica del efecto del espesor de la placa de contactoen la acción de palanca en conexión de acero tipo T, Rev. Int. Metod. Numer. para Calc. Disen. en Ing. 30, 11–19 (2012) [Google Scholar]
  8. R. Bai, S.L. Chan, J.P. Hao, Improved design of extended end-plate connection allowing for prying effects, J. Constr. Steel Res. 113, 13–27 (2015) [CrossRef] [Google Scholar]
  9. A. Ahmed, R. Hasan, Effect and evaluation of prying action for top- and seat-angle connections, Int. J. Adv. Struct. Eng. 7, 159–169 (2015) [CrossRef] [Google Scholar]
  10. L.A. Ciutina, Assemblages et comportement sismique de portiques en acier et mixtes acier − beton: experimentation et simulation numerique. Thèse, Institut National des Sciences Appliquées de Rennes, pp. 1-306 (2003) [Google Scholar]
  11. Y. Fares, Dimensionnement en fatigue des assemblages boulonnés à l’aide de critères de fatigue multiaxiale. Thèse, Institut National des Sciences Appliquées de Toulouse, pp. 1-215 (2006) [Google Scholar]
  12. J. Wang, B. Uy, D. Li et al., Fatigue behaviour of stainless steel bolts in tension and shear under constant-amplitude loading, Int. J. Fatigue, 133, pp. 1-13 (2020) [Google Scholar]
  13. H. Bartsch, B. Hoffmeister, M. Feldmann, Fatigue analysis of welds and bolts in end plate connections of I-girders, Int. J. Fatigue 138, pp. 1-15 (2020) [Google Scholar]
  14. Y. Liu, J. Chen, X. Zhang et al., Fatigue behaviour of blind bolts under tensile cyclic loads, J. Constr. Steel Res. 148, 16–27 (2018) [CrossRef] [Google Scholar]
  15. ArcelorMittal, Profilés et aciers marchands − sections and merchant bars, 2007, p. 238 [Google Scholar]
  16. EN 1993-1-9 - Eurocode 3: Design of steel structures - Part 1-9: Fatigue, European Standard, vol. 33, pp. 1-37, (2005) [Google Scholar]
  17. Vishay Micromesures France, Jauges d’extensometrie electrique : comment choisir une jauge d’extensomètrie, NT 505B, p. 16 [Google Scholar]
  18. J. Liu, H. Zenner, Berechnung der Dauerschwingfestigkeit bei mehrachsiger Beanspruchung Teil 1, Materwiss. Werksttech. 24, 240–249 (1993) [CrossRef] [Google Scholar]
  19. K. Dang Van, A. Le Douaron, H. P. Lieurade, Multiaxial fatigue limit: a new approach, Proceedings of the 6th International Conference on Fracture (ICF6), New Delhi, India, 4–10 December 1984, pp. 1879-1885 (1984) [Google Scholar]
  20. K. Dang Van, O. Griveau, B Message, On a new multiaxial fatigue limite criterion: theory and application, Proceedings of the International Conference on Biaxial/Multiaxial Fatigue, University of Sheffield, pp. 479–496 (1989) [Google Scholar]
  21. B. Weber, B. Kenmeugne, J.C. Clement et al., Improvements of multiaxial fatigue criteria computation for a strong reduction of calculation duration, Comput. Mater. Sci. 15, 381–399 (1999) [CrossRef] [Google Scholar]
  22. A.B. Camara, Analyse du comportement en fatigue d’assemblages boulonnés. Thèse, Université Clermont-Auvergne, pp. 1-201 (2019) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.