Special Issue on ‘Indentation advances in experiments and modelling’, edited by Florian Lacroix, Olga Smerdova and Eric Le Bourhis

Open Access

Editorial

Indentation, avancées expérimentales et de modélisation E1

F. Lacroix, O. Smerdova and E. Le Bourhis

Published online: 04 December 2023

DOI: https://doi.org/10.1051/mattech/2023032

• Abstract
• Full HTML
• PDF (80.48 KB)
• References

Open Access

Mechanical properties of stainless steel by using high temperature microhardness tester 402

Bruno Passilly, Ariane Quelquejeu and Amélie Kardache

Published online: 06 October 2023

DOI: https://doi.org/10.1051/mattech/2023021

• Abstract
• Full HTML
• PDF (2.041 MB)
• References

Identification des propriétés élastoplastiques des films minces de CrN en utilisant la technique de nanoindentation et la modélisation par éléments finis (FEM) 403

Asma Jellad

Published online: 04 December 2023

DOI: https://doi.org/10.1051/mattech/2023029

• Abstract
• Full HTML
• PDF (1.334 MB)
• References

Open Access

Experimental study of both bending moment and preload effect on the stress cycle upon bolts in a tee-stub 404

Aliou Badara Camara, Fabienne Pennec, Sébastien Durif, Jean-Louis Robert and Abdelhamid Bouchaïr

Published online: 19 December 2023

DOI: https://doi.org/10.1051/mattech/2023034

• Abstract
• Full HTML
• PDF (2.883 MB)
• References

Special Issue on ‘The role of Hydrogen in the transition to a sustainable steelmaking process’; edited by Ismael Matino and Valentina Colla

Open Access

Pathways towards full use of hydrogen as reductant and fuel 405

Joachim von Schéele

Published online: 14 December 2023

DOI: https://doi.org/10.1051/mattech/2023030

• Abstract
• Full HTML
• PDF (1.432 MB)
• References

Corrosion - Anticorrosion

The application of various papercutting elements in packaging design 401

Qianqian Xu

Published online: 06 October 2023

DOI: https://doi.org/10.1051/mattech/2023023

• Abstract
• Full HTML
• PDF (725.2 KB)
• References

Biomaterials (materials used in biological systems)

Review

Wear outcomes of three models of disc prostheses with two bearing materials metal-on-metal and metal-on-polyethylene 406

Moussa Amadji, Hacene Ameddah and Hammoudi Mazouz

Published online: 14 December 2023

DOI: https://doi.org/10.1051/mattech/2023031

• Abstract
• Full HTML
• PDF (2.905 MB)
• References

Publications

Free Access

Le dictionnaire historique de la sidérurgie française (2022) : lecture critique N1

Jean-Pierre Birat

Published online: 04 December 2023

DOI: https://doi.org/10.1051/mattech/2023028

• Abstract
• PDF (599.7 KB)
• Supplementary Material