Matériaux & Techniques - Forthcoming

  • Physical and Mechanical characterization of wood and fibers from a mature frond of date palm
    Tarek Djoudi, Mabrouk Hecini, Daniel Scida, Youcef Djebloun and Belhi Guerira
    Accepted: 09/10/2018
  • Estimation of accurate size, lattice strain using Williamson-Hall models, SSP and TEM of Al doped ZnO nanocrystals
    M. Bodke
    Accepted: 03/10/2018
  • Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340)
    A. Panda, S.R. Das and D. Dhupal
    Accepted: 03/10/2018
  • Editorial: Themed issue on Mechanical Assemblies
    Pierre CHALANDON, Alain DAIDIE and Henri-Paul LIEURADE
    Accepted: 02/10/2018
  • Determination of the out-of-plane flexibility of a bolted composite assembly using a homogenization approach
    Laurent Gornet, Romain Hamonou, Frédéric Jacquemin, Stéphane Auger and Pierre Chalandon
    Accepted: 01/10/2018
  • Determinants of the surface quality, density and dimensional correctness in selective laser melting of the Ti-13Zr-13Nb alloy
    Tomasz Seramak, Katarzyna Zasińska, Michel Mesnard, Karolina Bednarz, Paulina Fic and Andrzej Zielinski
    Accepted: 24/09/2018
  • Friction and wear behavior of biomaterials alloys AISI 316L and Ti6Al7Nb for total hip prosthesis
    Mamoun Fellah, Linda Aissani, Alain Iost, Amel Zairi, Alex Montagne and Alberto Mejias
    Accepted: 24/09/2018
  • Influence des effets dynamiques et thermiques sur l’assemblage par clouage – Etude Numérique et Expérimentale
    Fabien Goldspiegel, Philippe Michel, Jean-Baptiste Blumenfeld, Jean-Baptiste Oszenda and Katia Mocellin
    Accepted: 21/09/2018
  • Continuous casting of steels Part III: Solidification in a  conti-casting  machine; application to some steel grades.
    Jean Saleil and Jean Le Coze
    Accepted: 17/09/2018
  • Continuous casting of steels. Part II:  Main technical problems which were solved
    Jean Saleil and Jean Le Coze
    Accepted: 17/09/2018
  • Continuous casting of steels Part IV: Some inventive conti-casting machines : Rotative CC and Horizontal CC for long products; Thin Slab Casting and Strip Casting  for flat products.  
    Jean Saleil and Jean Le Coze
    Accepted: 17/09/2018
  • Continuous casting of steels.  Part I: Major steps of steels conti-casting development.
    Jean Saleil and Jean Le Coze
    Accepted: 17/09/2018
  • Ukraine's commitments under Association Agreement: challenges and opportunities for steel industry
    Volodymyr Shatokha
    Accepted: 13/09/2018
  • Characterization of the Effects Governing the Dynamic Behavior of Concrete
    A. Baraka, M. Matallah, M. Djafour and M. Bouazza
    Accepted: 13/09/2018
  • New approach for the loosening charachterization of bolted assembly
    Christophe Delcher
    Accepted: 21/08/2018
  • Study of the performance of adobe brick coated for sustainable construction in the Algerian Sahara
    Kerroum Nadir, Nouibat Brahim, Benyahia Azeddine and Redjem Ali
    Accepted: 13/08/2018
  • Correction note: Biaxial machine at Diffabs beamline for studying mechanical properties of thin films deposited onto polymer substrates
    Damien Faurie, Soundes Djaziri, Pierre-Olivier Renault, Eric Le Bourhis, Philippe Goudeau, Guillaume Geandier and Dominique Thiaudière
    Accepted: 31/07/2018
  • Influence of multiaxial fatigue gait type on bolted joint life assessment
    Aliou Badara Camara, Fabienne Pennec, Emmanuel Laurans, Vincent Peyronnet, Jean-Louis Robert and Abdelhamid Bouchaïr
    Accepted: 05/07/2018
  • Experimental and numerical investigation of the overload effect on fatigue behaviour of spot welded steel sheets
    Fabienne Pennec, Bianzeubé Tikri, Sébastien Bergamo, Michel Duchet, Bastien Weber and Jean-Louis Robert
    Accepted: 02/07/2018
  • Prédire correctement l'effet des chocs thermiques sur l'assemblage corps-couvercle d'un robinet
    Jean-François Rit, Sébastien Meunier, Jérôme Ferrari, David Hersant and Jean-Philippe Mathieu
    Accepted: 22/06/2018
  • Numerical modeling of the contribution made by fretting-fatigue to aging of overhead line conductors
    John Redford, Henri-Paul Lieurade, Maxime Gueguin, Fikri Hafid, Christine Yang and Jean-Michel Ghidaglia
    Accepted: 12/06/2018
  • Dynamic vibration testing of fasteners: fastener self-loosening theory, vibration testing practical applications, comparison of the international standards and recommendations on how to set-up a meaningful testing protocol
    Franck Pichoff, Matthieu Kummel and Morten Schiff
    Accepted: 25/05/2018
  • Damped dynamic response of strengthened beams by composite coats under moving force by FEM
    Abdennacer Chemami, Youcef Khadri, Sabiha Tekili, El Mostafa Daya, Ali Daouadji and Zitouni Azari
    Accepted: 16/05/2018
  • Non Welded Assemblies in Nuclear Reactors
    J. Dhers
    Accepted: 13/12/2017