EDP Sciences logo
Subscriber Authentication Point
Search
Menu
Home All issues Volume 106 / No 3 (2018) Matériaux & Techniques, 106 3 (2018) 308 References
Issue
Matériaux & Techniques
Volume 106, Number 3, 2018
Assemblages Mécaniques / Mechanical Assemblies
Article Number 308
Number of page(s) 12
Section Comportement en service / Behaviour in service
DOI https://doi.org/10.1051/mattech/2018031
Published online 06 November 2018
  1. Norme Européenne, Conducteurs pour lignes aériennes – Conducteurs à brins circulaires, câblés en couches concentriques, NF EN 50182, 2001 [Google Scholar]
  2. P. Van Dyke, C. Hardy, M. St-Louis, J.-L. Gardes, Comparative field tests of various practices for the control of wind-induced conductor motion, IEEE Trans. Power Deliv. 12, 1029–1034 (1997) [Google Scholar]
  3. P.-O. Dallaire, Étude des vibrations éoliennes instationnaires, Thèse de master, Université de Sherbrooke, Canada, 2008 [Google Scholar]
  4. D. Nowell, D.A. Hills, Mechanics of fretting fatigue tests, Int. J. Mech. Sci. 29, 355–365 (1987) [Google Scholar]
  5. D.A. Hills, Mechanics of fretting fatigue, Wear 175, 107–113 (1994) [Google Scholar]
  6. Z.R. Zhou, A. Cardou, S. Goudreau, M. Fiset, Fretting patterns in a conductor-clamp contact zone, Fatigue Fract. Eng. Mater. Struct. 17, 661–669 (1994) [Google Scholar]
  7. B. Ouaki, S. Goudreau, A. Cardou, M. Fiset, Fretting fatigue analysis of aluminium conductor wires near the suspension clamp: metallurgical and fracture mechanics analysis, J. Strain Anal. Eng. Des. 38, 133–147 (2003) [Google Scholar]
  8. C.R.F. Azevedo, A.M.D. Henriques, A.R. Pulino Filho, J.L.A. Ferreira, J.A. Araújo, Fretting fatigue in overhead conductors: Rig design and failure analysis of a Grosbeak aluminium cable steel reinforced conductor, Eng. Fail. Anal. 16, 136–151 (2009) [Google Scholar]
  9. C.R.F. Azevedo, T. Cescon, Failure analysis of aluminum cable steel reinforced (ACSR) conductor of the transmission line crossing the Parana River, Eng. Fail. Anal. 9, 645–664 (2002) [Google Scholar]
  10. S. Fouvry, P. Kapsa, L. Vincent, An elastic-plastic shakedown analysis of fretting wear, Wear 247, 41–54 (2001) [Google Scholar]
  11. ABAQUS/Standard User’s Manual, Version 6.14, Simulia, 2014 [Google Scholar]
  12. K. Dang Van, M.H. Maitournam, Elasto-plastic calculations of the mechanical state in reciprocating moving contacts: Application to fretting fatigue, in: Fretting Fatigue, Mechanical Engineering Publications, London, 1994, pp. 161–168 [Google Scholar]
  13. P. Ladevèze, La méthode à grand incrément de temps pour l’analyse de structures à comportement non linéaire décrit par variables internes, Comptes-rendus l’Acad. Sci. Série II 309, 1095–1099 (1989) [Google Scholar]
  14. N. Maouche, Modélisation des phénomènes d’endommagements dus aux contacts à faible amplitude de débattement, Thèse de doctorat, École Nationale des Ponts et Chaussées, France, 1997 [Google Scholar]
  15. E. Pierres, Simulation tridimensionnelle multi-échelle de la propagation de fissures expérimentales sous chargement de fretting fatigue par la méthode des éléments finis étendus, Thèse de doctorat, INSA Lyon, France, 2010 [Google Scholar]
  16. K. Dang Van, B. Griveau, O. Message, On a new multiaxial fatigue limit criterion: Theory and application, in: Biaxial and Multiaxial Fatigue, Mechanical Engineering Publications, London, 1989, pp. 479–496 [Google Scholar]
  17. K. Dang Van, Macro-micro approach in high-cycle multiaxial fatigue, in: Advances in Multiaxial Fatigue, ASTM International, Philadelphie, 1993 [Google Scholar]
  18. C. Petiot, L. Vincent, K. Dang Van, N. Maouche, J. Foulquier, B. Journet, An analysis of fretting-fatigue failure combined with numerical calculations to predict crack nucleation, Wear 181, 101–111 (1995) [Google Scholar]
  19. F. Lévesque, S. Goudreau, L. Cloutier, A. Cardou, Finite element model of the contact between a vibrating conductor and a suspension clamp, Tribol. Int. 44, 1014–1023 (2011) [Google Scholar]
  20. F. Lévesque, S. Goudreau, A. Cardou, L. Cloutier, Strain measurements on ACSR conductors during during fatigue tests I – Experimental method and data, IEEE Trans. Power Deliv. 25, 2825–2834 (2010) [Google Scholar]
  21. S. Goudreau, F. Lévesque, A. Cardou, L. Cloutier, Strain measurements on ACSR conductors during fatigue tests II – Stress fatigue indicators, IEEE Trans. Power Deliv. 25, 2997–3006 (2010) [Google Scholar]
  22. S. Goudreau, F. Lévesque, A. Cardou, L. Cloutier, Strain measurements on ACSR conductors during fatigue tests III – Strains related to support geometry, IEEE Trans. Power Deliv. 25, 3007–3016 (2010) [Google Scholar]
  23. M.H. Maitournam, K. Dang Van, J.-F. Flavenot, Fatigue design of notched components with stress gradients and cyclic plasticity, Adv. Eng. Mater. 11, 750–754 (2009) [Google Scholar]
  24. B. Crossland, Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel, in: Proceedings of the International Conference on Fatigue of Metals, Institution of Mechanical Engineers, London, 1956, pp. 138–149 [Google Scholar]
  25. K.N. Smith, P. Watson, T.H. Topper, A stress-strain function for the fatigue of metals, J. Mater. 5, 767–778 (1970) [Google Scholar]
  26. C. Ruiz, P.H.B. Boddington, K.C. Chen, An investigation of fatigue and fretting in a dovetail joint, Exp. Mech. 24, 208–217 (1984) [Google Scholar]
  27. J. Redford, M.C. Nguyen, H.-P. Lieurade, M. Gueguin, F. Hafid, C. Yang, J.-M. Ghidaglia, Prediction of crack initiation due to fretting-fatigue in overhead power lines, Article en préparation [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.