Matériaux & Techniques

La revue des matériaux industriels, leurs techniques de mise en œuvre et leur utilisation

Special Issue on ‘Society and Materials, Social Sciences and Materials Science’, edited by J.P. Birat, A. Declich, J.R. Garcia, A.L. Hettinger, L. Kolbeinsen, J. Peters and M. Weil

Open Access

Stakeholder engagement in hubs for circularity in Europe

Michael Kohlgrüber, Adrian Götting and Karina Maldonado-Mariscal

Matériaux & Techniques, 114 3 (2026) 307

Published online: 21 avril 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Enhancing structural and thermal properties of low-density polyethylene waste using dolomite and calcite mineral fillers

Sameh Attia-Essaies, Asma Nouira, Mehdi Ismail, Najoua Barhoumi, Aymen Ben Ahmed and Ezzedine Srasra

Matériaux & Techniques, 114 3 (2026) 303

Published online: 25 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Electrophoretic deposition of hydroxyapatite coating on Ti6Al4V alloy: impact of chitosan on adhesion properties and microstructure

Jassem Kammoun, Hafedh Dhiflaoui and Naoufel Ben Moussa

Matériaux & Techniques, 114 3 (2026) 302

Published online: 24 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Effect of 3D printing parameters on the thermomechanical behavior of TPU 90A

Hanen Boubakri, Naoufel Ben Moussa, Houda Yahyaoui and Mohamed Habibi

Matériaux & Techniques, 114 3 (2026) 304

Published online: 24 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Analysis of cutting parameters for trimming carbon, glass and hybrid fiber reinforced polymer laminates using vibration monitoring and surface roughness assessment

Ezzeddine Ftoutou, Mihed Ben Said, Imed Hajjaji, Sirine Stambouli, Moez Trigui and Ated Ben Khalifa

Matériaux & Techniques, 114 3 (2026) 305

Published online: 24 mars 2026
Special Issue on ‘Opportunities and Challenges of Hydrogen Use for Steelmaking Decarbonization’, edited by Ismael Matino, Valentina Colla and Akhilesh Swarnakar

Open Access

Hydrogen plasma smelting reduction of Cr₂O₃/Chromite: challenges, insights, and initial results of direct and sustainable stainless-steel production

Mohammad Jafarzadeh, Mert Saraçoğlu, Michael A. Zarl, Daniel Ernst and Susanne K. Michelic

Matériaux & Techniques, 114 3 (2026) 306

Published online: 24 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Deep learning approach for predicting hoop-direction mechanical behavior of tubular materials in hydroforming

Zied Ktari and Ali Khalfallah

Matériaux & Techniques, 114 3 (2026) 301

Published online: 20 mars 2026

Most read articles

307	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
274	Materials and Society: transitions in society, materials and energy Free Access How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Published online: 26 avril 2021
210	Special Issue on ‘Opportunities and Challenges of Hydrogen Use for Steelmaking Decarbonization’, edited by Ismael Matino, Valentina Colla and Akhilesh Swarnakar Open Access Hydrogen plasma smelting reduction of Cr₂O₃/Chromite: challenges, insights, and initial results of direct and sustainable stainless-steel production Mohammad Jafarzadeh, Mert Saraçoğlu, Michael A. Zarl, Daniel Ernst and Susanne K. Michelic Matériaux & Techniques, 114 3 (2026) 306 Published online: 24 mars 2026
108	Special Issue on ‘Glass in our daily life’, edited by Xavier Capilla, Frédéric Angeli and Daniel R. Neuville Open Access Review Méthodes d’analyse des verres Charles Le Losq, Mariona Tarrago, Wilfried Blanc, Peggy Georges, Louis Hennet, Didier Zanghi, Gérald Lelong, Salomé Pannefieu and Daniel R. Neuville Matériaux & Techniques, 110 4 (2022) 403 Published online: 5 octobre 2022
107	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Open Access Decarbonization of the steel industry. A techno-economic analysis Amaia Sasiain Conde, Katharina Rechberger, Andreas Spanlang, Hermann Wolfmeir and Christopher Harris Matériaux & Techniques, 109 3-4 (2021) 305 Published online: 18 février 2022

Volume 114 / Numéro 3 (2026) (in progress)
See the table of contents
Volume 114 / Numéro 2 (2026)
Légende : High-precision fabrication of a lattice cube, showcasing advanced materials processing and smart manufacturing
See the table of contents
Volume 114 / Numéro 1 (2026)
Légende : SEM-EDS mapping of carbothermically reduced rotary kiln slag (© Gianluca Dall'Osto, Carlo Mapelli and Davide Mombelli - Dipartimento di Meccanica, Politecnico di Milano)
See the table of contents
Volume 113 / Numéro 5-6 (2025)
High-precision fabrication of a lattice cube, showcasing advanced materials processing and smart manufacturing
See the table of contents
Volume 113 / Numéro 4 (2025)
Légende : Photo © Andrew McLeish.
See the table of contents

Recent articles (published in the past 5 years)

22	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
21	Special Issue on ‘Materials and Society: the circular economy, design for circularity and industrial symbiosis’, edited by Jean-Pierre Birat, Gaël Fick, Nicolas Perry, Andrea Declich, Leiv Kolbensein, Dominique Millet and Thecle Alix Open Access Influence of design properties of printed electronics on their environmental profile Tobias M. Prenzel, Florian Gehring, Franziska Fuhs and Stefan Albrecht Matériaux & Techniques, 109 5-6 (2021) 506 Published online: 10 mai 2022
21	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Open Access Hydrogen steelmaking. Part 1: Physical chemistry and process metallurgy Fabrice Patisson, Olivier Mirgaux and Jean-Pierre Birat Matériaux & Techniques, 109 3-4 (2021) 303 Published online: 3 février 2022
15	Review A review on the influence of natural-synthetic fibre hybrid reinforced polymer composites for bulletproof and ballistic applications Dennis O. Bichang’a, Oladunni O. Alabi, Isiaka O. Oladele, Fatai O. Aramide, Adeolu A. Adediran and Patricia A.I. Popoola Matériaux & Techniques, 110 5 (2022) 503 Published online: 5 octobre 2022
15	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Open Access Decarbonization of the steel industry. A techno-economic analysis Amaia Sasiain Conde, Katharina Rechberger, Andreas Spanlang, Hermann Wolfmeir and Christopher Harris Matériaux & Techniques, 109 3-4 (2021) 305 Published online: 18 février 2022

Facteur d'impact 2024 : 1,1
Facteur d'impact à 5 ans 2024 : 0,9

*Journal Citation Reports™ from Clarivate, 2025

Inscrivez-vous aux alertes courriels

Éditeur en chef : Jean-Pierre Birat
Rédacteur en chef adjoint : Xavier Colin

ISSN : 0032-6895 - eISSN : 1778-3771

News

More News

Nouveaux livres

Accédez à notre sélection de livres

1565	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
1390	Materials and Society: transitions in society, materials and energy Free Access How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Published online: 26 avril 2021
544	Special Issue on ‘The role of Hydrogen in the transition to a sustainable steelmaking process’; edited by Ismael Matino and Valentina Colla Free Access Review Net-Zero transition in the steel sector: beyond the simple emphasis on hydrogen, did we miss anything? Jean-Pierre Birat Matériaux & Techniques, 111 2 (2023) 201 Published online: 14 juin 2023
524	Special Issue on ‘Opportunities and Challenges of Hydrogen Use for Steelmaking Decarbonization’, edited by Ismael Matino, Valentina Colla and Akhilesh Swarnakar Open Access Hydrogen plasma smelting reduction of Cr₂O₃/Chromite: challenges, insights, and initial results of direct and sustainable stainless-steel production Mohammad Jafarzadeh, Mert Saraçoğlu, Michael A. Zarl, Daniel Ernst and Susanne K. Michelic Matériaux & Techniques, 114 3 (2026) 306 Published online: 24 mars 2026
482	Materials and Society: transitions in society, materials and energy Open Access The beginning and the end of the aluminium value chain Leiv Kolbeinsen Matériaux & Techniques, 108 5-6 (2020) 506 Published online: 26 avril 2021

3733	Materials and Society: transitions in society, materials and energy Free Access How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Published online: 26 avril 2021
3434	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
2023	Special Issue on ‘Circular Economy initiatives and solutions in the steel sector’, edited by Valentina Colla and Ismael Matino Open Access Review Roadmap for recycling practices and resource utilization in the iron and steelmaking industry: a case studies Lina Kieush, Johannes Rieger, Rosella Attrotto, Angelo Sorino, Wim van der Stricht, Harmen Oterdoom, Eetu Pekka Heikkinen, Gianluca Dall’Osto, Carlo Mapelli, Davide Mombelli et al. (15 more) Matériaux & Techniques, 112 5 (2024) 503 Published online: 21 novembre 2024
1635	Special Issue on ‘Glass in our daily life’, edited by Xavier Capilla, Frédéric Angeli and Daniel R. Neuville Open Access Review Méthodes d’analyse des verres Charles Le Losq, Mariona Tarrago, Wilfried Blanc, Peggy Georges, Louis Hennet, Didier Zanghi, Gérald Lelong, Salomé Pannefieu and Daniel R. Neuville Matériaux & Techniques, 110 4 (2022) 403 Published online: 5 octobre 2022
1331	Materials and Society: transitions in society, materials and energy Open Access The beginning and the end of the aluminium value chain Leiv Kolbeinsen Matériaux & Techniques, 108 5-6 (2020) 506 Published online: 26 avril 2021