Deep learning approch for predicting the hoop-direction mechanical behavior of tubular materials in hydroforming Zied Ktari and Ali Khalfallah Accepted: 12/01/2026
Electrophoretic deposition of hydroxyapatite coating on Ti6Al4V alloy: Impact of chitosan on adhesion properties and microstructure Jassem Kammoun, Naoufel Ben Moussa and Hafedh Dhiflaoui Accepted: 05/01/2026
Advancing hydrogen plasma smelting reduction: Experimental insights from a pilot plant Bernhard Adami, Manuel Farkas, Johannes Schenk and Michael Andreas Zarl Accepted: 12/12/2025
Hydrogen Plasma Smelting Reduction of Cr₂O₃/Chromite: The First Step to Direct and Sustainable Production of Stainless Steel Mohammad Jafarzadeh, Mert Saraçoğlu, Michael Andreas Zarl, Daniel Ernst and Susanne Katharina Michelic Accepted: 29/12/2025
Stakeholder Engagement in Hubs for Circularity in Europe Karina Maldonado-Mariscal, Michael Kohlgrüber and Adrian Götting Accepted: 19/02/2026
Enhancing the mechanical performance of high-content straw/PLA biocomposites via talc and starch reinforcement Kangjie Sun, zhonghua Yang and Bohan Zhang Accepted: 30/12/2025
Improvement of Wear Resistance of Hardox 400 Steel by Duplex Treatment Combining Gas Carburizing and CrN PVD Coating Abir Khaldi, Abdelkarim Ghanem and Mohamed Ali Terres Accepted: 17/01/2026
Multi‑Objective Optimization of Fused Deposition Modeling Process Parameters Using Taguchi-Based Grey Relational Analysis, and Particle Swarm Optimization for PLA Parts KHALED BOULAHEM, Seddik Shiri, Badreddine LARBI, Mohamed Toumi NASRI and Ated BEN KHALIFA Accepted: 11/12/2025
Experimental tests and numerical validation of a wrist-hand orthosis Khaled Ben Amor, Sami Chatti and Borhen Louhichi Accepted: 08/12/2025
Performance of a HSLA steel produced via EAF and Arvedi ESP™ process route for the service in gaseous hydrogen Lorenzo Zanaboni, Roberto Venturini, Noris Battocletti, Marco Bartoletti, Adriano Capparelli and Chiara Zitelli Accepted: 25/02/2026
Enhancing Structural and Thermal Properties of Low-Density Polyethylene Waste Using Dolomite and Calcite Mineral Fillers Najoua Barhoumi, Sameh Attia, Mehdi Ismai, Aymen ben Ahmed, Ezzedine srasra and Asma Nouira Accepted: 16/01/2026
Improving sustainability of Cold Rolling of Low-Carbon Steels via Oil Free Lubricants Valentina Colla, Tommaso Grossi, Alice Petrucciani, Monia Niero, Delphine Reche, Andreas Ban, Leon Jacobs, Martin Raulf, Frank Busenkell, Martin Schlupp, Marcus Rickers, Bas Smeulders, Mike Cook, Wim Filemon, Pablo Bakermans, Shokoufeh Bakhoda, Martin Hubrich and Orlando Toscanelli Accepted: 16/01/2026
Fatigue Study of AlSi10Mg Alloy as-built IBRAHIM KALIL CISSE, Anouar Nasr and ABíLIO DE JESUS Accepted: 13/01/2026
Effect of 3D Printing Parameters on the thermomechanical Behavior of TPU 90A Hanen Boubakri, Naoufel Ben Moussa, Houda YAHYAOUI and Mohamed Habibi Accepted: 10/01/2026
Optimization of Cutting Parameters for Trimming Carbon, Glass and Hybrid Fiber Reinforced Polymers Laminated Composite Materials Using Vibration Monitoring and Surface Roughness Analysis Ezzeddine Ftoutou, Mihed Ben said, Imed Hajjaji, Moez Trigui, Ated Ben Khalifa and Sirine Stambouli Accepted: 15/01/2026
Influence of Manufacturing Processes on the Physicochemical and Mechanical Properties of Composites Reinforced with Palm Fibers Badreddine LARBI, Marwa LAHOUIOUI, Gnilane SOW, Mohamed Toumi NASRI and Magali FOIS Accepted: 10/12/2025
