Matériaux & Techniques

La revue des matériaux industriels, leurs techniques de mise en œuvre et leur utilisation

Special Issue on ‘Opportunities and Challenges of Hydrogen Use for Steelmaking Decarbonization’, edited by Ismael Matino, Valentina Colla and Akhilesh Swarnakar

Open Access

Effect of Hydrogen as fuel for continuous annealing of AISI 316L stainless steel—annealing and pickling tests

Eugenia Sainsus, Lorenza Catini, Niccolò Massarelli and Baldo Gurreri

Matériaux & Techniques, 114 3 (2026) 308

Published online: 13 mai 2026
Free Access

Editorial

Matériaux et Techniques Editorial for 2026: Where does the journal wish to go?

Jean-Pierre Birat and Xavier Colin

Matériaux & Techniques, 114 3 (2026) E1

Published online: 23 avril 2026
Special Issue on ‘Society and Materials, Social Sciences and Materials Science’, edited by J.P. Birat, A. Declich, J.R. Garcia, A.L. Hettinger, L. Kolbeinsen, J. Peters and M. Weil

Open Access

Stakeholder engagement in hubs for circularity in Europe

Michael Kohlgrüber, Adrian Götting and Karina Maldonado-Mariscal

Matériaux & Techniques, 114 3 (2026) 307

Published online: 21 avril 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Enhancing structural and thermal properties of low-density polyethylene waste using dolomite and calcite mineral fillers

Sameh Attia-Essaies, Asma Nouira, Mehdi Ismail, Najoua Barhoumi, Aymen Ben Ahmed and Ezzedine Srasra

Matériaux & Techniques, 114 3 (2026) 303

Published online: 25 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Electrophoretic deposition of hydroxyapatite coating on Ti6Al4V alloy: impact of chitosan on adhesion properties and microstructure

Jassem Kammoun, Hafedh Dhiflaoui and Naoufel Ben Moussa

Matériaux & Techniques, 114 3 (2026) 302

Published online: 24 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Effect of 3D printing parameters on the thermomechanical behavior of TPU 90A

Hanen Boubakri, Naoufel Ben Moussa, Houda Yahyaoui and Mohamed Habibi

Matériaux & Techniques, 114 3 (2026) 304

Published online: 24 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Analysis of cutting parameters for trimming carbon, glass and hybrid fiber reinforced polymer laminates using vibration monitoring and surface roughness assessment

Ezzeddine Ftoutou, Mihed Ben Said, Imed Hajjaji, Sirine Stambouli, Moez Trigui and Ated Ben Khalifa

Matériaux & Techniques, 114 3 (2026) 305

Published online: 24 mars 2026

Most read articles

135	Materials and Society: transitions in society, materials and energy Free Access How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Published online: 26 avril 2021
128	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
107	Materials and Society: transitions in society, materials and energy Open Access The beginning and the end of the aluminium value chain Leiv Kolbeinsen Matériaux & Techniques, 108 5-6 (2020) 506 Published online: 26 avril 2021
102	Special Issue on ‘Transitions for materials and society’, edited by Jean-Pierre Birat, Andrea Declich, Ayoung Jo and Gaël Fick Free Access Materials are social constructs, but they also have agency Jean-Pierre Birat Matériaux & Techniques, 111 3 (2023) 302 Published online: 14 juin 2023
92	Society and Materials (SAM11) Free Access Musica Universalis or the Music of the Spheres Jean-Pierre Birat Matériaux & Techniques, 105 5-6 (2017) 509 Published online: 7 juin 2018

Volume 114 / Numéro 3 (2026) (in progress)
See the table of contents
Volume 114 / Numéro 2 (2026)
Légende : High-precision fabrication of a lattice cube, showcasing advanced materials processing and smart manufacturing
See the table of contents
Volume 114 / Numéro 1 (2026)
Légende : SEM-EDS mapping of carbothermically reduced rotary kiln slag (© Gianluca Dall'Osto, Carlo Mapelli and Davide Mombelli - Dipartimento di Meccanica, Politecnico di Milano)
See the table of contents
Volume 113 / Numéro 5-6 (2025)
High-precision fabrication of a lattice cube, showcasing advanced materials processing and smart manufacturing
See the table of contents
Volume 113 / Numéro 4 (2025)
Légende : Photo © Andrew McLeish.
See the table of contents

Recent articles (published in the past 5 years)

23	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
23	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Open Access Hydrogen steelmaking. Part 1: Physical chemistry and process metallurgy Fabrice Patisson, Olivier Mirgaux and Jean-Pierre Birat Matériaux & Techniques, 109 3-4 (2021) 303 Published online: 3 février 2022
22	Special Issue on ‘Materials and Society: the circular economy, design for circularity and industrial symbiosis’, edited by Jean-Pierre Birat, Gaël Fick, Nicolas Perry, Andrea Declich, Leiv Kolbensein, Dominique Millet and Thecle Alix Open Access Influence of design properties of printed electronics on their environmental profile Tobias M. Prenzel, Florian Gehring, Franziska Fuhs and Stefan Albrecht Matériaux & Techniques, 109 5-6 (2021) 506 Published online: 10 mai 2022
15	Review A review on the influence of natural-synthetic fibre hybrid reinforced polymer composites for bulletproof and ballistic applications Dennis O. Bichang’a, Oladunni O. Alabi, Isiaka O. Oladele, Fatai O. Aramide, Adeolu A. Adediran and Patricia A.I. Popoola Matériaux & Techniques, 110 5 (2022) 503 Published online: 5 octobre 2022
15	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Open Access Decarbonization of the steel industry. A techno-economic analysis Amaia Sasiain Conde, Katharina Rechberger, Andreas Spanlang, Hermann Wolfmeir and Christopher Harris Matériaux & Techniques, 109 3-4 (2021) 305 Published online: 18 février 2022

Facteur d'impact 2024 : 1,1
Facteur d'impact à 5 ans 2024 : 0,9

*Journal Citation Reports™ from Clarivate, 2025

Inscrivez-vous aux alertes courriels

Éditeur en chef : Jean-Pierre Birat
Rédacteur en chef adjoint : Xavier Colin

ISSN : 0032-6895 - eISSN : 1778-3771

News

More News

Nouveaux livres

Accédez à notre sélection de livres

640	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
537	Materials and Society: transitions in society, materials and energy Free Access How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Published online: 26 avril 2021
476	Special Issue on ‘Opportunities and Challenges of Hydrogen Use for Steelmaking Decarbonization’, edited by Ismael Matino, Valentina Colla and Akhilesh Swarnakar Open Access Hydrogen plasma smelting reduction of Cr₂O₃/Chromite: challenges, insights, and initial results of direct and sustainable stainless-steel production Mohammad Jafarzadeh, Mert Saraçoğlu, Michael A. Zarl, Daniel Ernst and Susanne K. Michelic Matériaux & Techniques, 114 3 (2026) 306 Published online: 24 mars 2026
467	Special Issue on ‘Glass in our daily life’, edited by Xavier Capilla, Frédéric Angeli and Daniel R. Neuville Open Access Review Méthodes d’analyse des verres Charles Le Losq, Mariona Tarrago, Wilfried Blanc, Peggy Georges, Louis Hennet, Didier Zanghi, Gérald Lelong, Salomé Pannefieu and Daniel R. Neuville Matériaux & Techniques, 110 4 (2022) 403 Published online: 5 octobre 2022
395	Materials and Society: transitions in society, materials and energy Open Access The beginning and the end of the aluminium value chain Leiv Kolbeinsen Matériaux & Techniques, 108 5-6 (2020) 506 Published online: 26 avril 2021

3126	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
3025	Materials and Society: transitions in society, materials and energy Free Access How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Published online: 26 avril 2021
1704	Special Issue on ‘Circular Economy initiatives and solutions in the steel sector’, edited by Valentina Colla and Ismael Matino Open Access Review Roadmap for recycling practices and resource utilization in the iron and steelmaking industry: a case studies Lina Kieush, Johannes Rieger, Rosella Attrotto, Angelo Sorino, Wim van der Stricht, Harmen Oterdoom, Eetu Pekka Heikkinen, Gianluca Dall’Osto, Carlo Mapelli, Davide Mombelli et al. (15 more) Matériaux & Techniques, 112 5 (2024) 503 Published online: 21 novembre 2024
1423	Special Issue on ‘Glass in our daily life’, edited by Xavier Capilla, Frédéric Angeli and Daniel R. Neuville Open Access Review Méthodes d’analyse des verres Charles Le Losq, Mariona Tarrago, Wilfried Blanc, Peggy Georges, Louis Hennet, Didier Zanghi, Gérald Lelong, Salomé Pannefieu and Daniel R. Neuville Matériaux & Techniques, 110 4 (2022) 403 Published online: 5 octobre 2022
1217	Materials and Society: transitions in society, materials and energy Open Access The beginning and the end of the aluminium value chain Leiv Kolbeinsen Matériaux & Techniques, 108 5-6 (2020) 506 Published online: 26 avril 2021