Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Deep learning approach for predicting hoop-direction mechanical behavior of tubular materials in hydroforming 301

Zied Ktari and Ali Khalfallah

Published online: 20 mars 2026

DOI: https://doi.org/10.1051/mattech/2026006

• Abstract
• Full HTML
• PDF (2.425 MB)
• References

Electrophoretic deposition of hydroxyapatite coating on Ti6Al4V alloy: impact of chitosan on adhesion properties and microstructure 302

Jassem Kammoun, Hafedh Dhiflaoui and Naoufel Ben Moussa

Published online: 24 mars 2026

DOI: https://doi.org/10.1051/mattech/2026004

• Abstract
• Full HTML
• PDF (1.824 MB)
• References

Enhancing structural and thermal properties of low-density polyethylene waste using dolomite and calcite mineral fillers 303

Sameh Attia-Essaies, Asma Nouira, Mehdi Ismail, Najoua Barhoumi, Aymen Ben Ahmed and Ezzedine Srasra

Published online: 25 mars 2026

DOI: https://doi.org/10.1051/mattech/2026010

• Abstract
• Full HTML
• PDF (1.771 MB)
• References

Effect of 3D printing parameters on the thermomechanical behavior of TPU 90A 304

Hanen Boubakri, Naoufel Ben Moussa, Houda Yahyaoui and Mohamed Habibi

Published online: 24 mars 2026

DOI: https://doi.org/10.1051/mattech/2026005

• Abstract
• Full HTML
• PDF (3.964 MB)
• References

Analysis of cutting parameters for trimming carbon, glass and hybrid fiber reinforced polymer laminates using vibration monitoring and surface roughness assessment 305

Ezzeddine Ftoutou, Mihed Ben Said, Imed Hajjaji, Sirine Stambouli, Moez Trigui and Ated Ben Khalifa

Published online: 24 mars 2026

DOI: https://doi.org/10.1051/mattech/2026008

• Abstract
• Full HTML
• PDF (4.409 MB)
• References

Special Issue on ‘Opportunities and Challenges of Hydrogen Use for Steelmaking Decarbonization’, edited by Ismael Matino, Valentina Colla and Akhilesh Swarnakar

Open Access

Hydrogen plasma smelting reduction of Cr₂O₃/Chromite: challenges, insights, and initial results of direct and sustainable stainless-steel production 306

Mohammad Jafarzadeh, Mert Saraçoğlu, Michael A. Zarl, Daniel Ernst and Susanne K. Michelic

Published online: 24 mars 2026

DOI: https://doi.org/10.1051/mattech/2026003

• Abstract
• Full HTML
• PDF (2.621 MB)
• References

Open Access

Effect of Hydrogen as fuel for continuous annealing of AISI 316L stainless steel—annealing and pickling tests 308

Eugenia Sainsus, Lorenza Catini, Niccolò Massarelli and Baldo Gurreri

Published online: 13 mai 2026

DOI: https://doi.org/10.1051/mattech/2026017

• Abstract
• Full HTML
• PDF (8.704 MB)
• References

Special Issue on ‘Society and Materials, Social Sciences and Materials Science’, edited by J.P. Birat, A. Declich, J.R. Garcia, A.L. Hettinger, L. Kolbeinsen, J. Peters and M. Weil

Open Access

Stakeholder engagement in hubs for circularity in Europe 307

Michael Kohlgrüber, Adrian Götting and Karina Maldonado-Mariscal

Published online: 21 avril 2026

DOI: https://doi.org/10.1051/mattech/2026012

• Abstract
• Full HTML
• PDF (275.9 KB)
• References

Free Access

Editorial

Matériaux et Techniques Editorial for 2026: Where does the journal wish to go? E1

Jean-Pierre Birat and Xavier Colin

Published online: 23 avril 2026

DOI: https://doi.org/10.1051/mattech/2026015

• Abstract
• Full HTML
• PDF (127.8 KB)
• References