Matériaux & Techniques

La revue des matériaux industriels, leurs techniques de mise en œuvre et leur utilisation

Special Issue on ‘Society and Materials, Social Sciences and Materials Science’, edited by J.P. Birat, A. Declich, J.R. Garcia, A.L. Hettinger, L. Kolbeinsen, J. Peters and M. Weil

Open Access

Integrating environmental impacts into material flow analysis: A case study on the effect of electricity mixture on the future circular development of EV battery value chain

Veera Marttila, Patrycja Piotrowska, Jyri Hanski, Elina Pohjalainen and Päivi Kivikytö-Reponen

Matériaux & Techniques, 114 4 (2026) 405

Published online: 14 juillet 2026
Special Issue on ‘Advances in Steel Technologies?, edited by Carlo Mapelli, Silvia Barella and Riccardo Carli

Free Access

Editorial

The multifaceted path to sustainable metallurgy: process innovation, circular economy, and digitalization

Carlo Mapelli, Silvia Barella and Riccardo Carli

Matériaux & Techniques, 114 4 (2026) E1

Published online: 1 juin 2026
Special Issue on ‘Advances in Steel Technologies’, edited by Carlo Mapelli, Silvia Barella and Riccardo Carli

Multi-functional simulation system for continuous hot bar rolling: development and industrial application

Shuo Guo, Caiyi Liu, Silvia Barella, Yan Peng, Andrea Gruttadauria, Marco Belfi, De Li, Yang Liu, Xiaobo Qu, Marwan Abdelwahed et al. (2 more)

Matériaux & Techniques, 114 4 (2026) 404

Published online: 29 mai 2026
Special Issue on ‘Advances in Steel Technologies’, edited by Carlo Mapelli, Silvia Barella and Riccardo Carli

Performance of a HSLA steel produced via EAF and Arvedi ESP^™ process route for the service in gaseous hydrogen

Roberto Venturini, Lorenzo Zanaboni, Noris Battocletti, Marco Bartoletti, Adriano Capparelli and Chiara Zitelli

Matériaux & Techniques, 114 4 (2026) 401

Published online: 22 mai 2026
Contribution of aluminum fibers to mortar performance: experimental approach and Weibull modeling

Abdelhafid Boukellouda, Houssam Slimanou, Toufik Kheffache, Samir Lillouch and Nasser Chelouah

Matériaux & Techniques, 114 4 (2026) 402

Published online: 20 mai 2026
Special Issue on ‘Advances in Steel Technologies’, edited by Carlo Mapelli, Silvia Barella and Riccardo Carli

Open Access

Assessment of the natural absorption of CO₂ performed by steelmaking slag

Carlo Mapelli, Davide Mombelli, Gianluca Dall’Osto, Elena Da Val, Roberto Moreschi and Giovanni Baldo

Matériaux & Techniques, 114 4 (2026) 403

Published online: 20 mai 2026
Special Issue on ‘Opportunities and Challenges of Hydrogen Use for Steelmaking Decarbonization’, edited by Ismael Matino, Valentina Colla and Akhilesh Swarnakar

Open Access

Effect of Hydrogen as fuel for continuous annealing of AISI 316L stainless steel—annealing and pickling tests

Eugenia Sainsus, Lorenza Catini, Niccolò Massarelli and Baldo Gurreri

Matériaux & Techniques, 114 3 (2026) 308

Published online: 13 mai 2026

Most read articles

498	Special Issue on ‘The role of Hydrogen in the transition to a sustainable steelmaking process’; edited by Ismael Matino and Valentina Colla Open Access Pathways towards full use of hydrogen as reductant and fuel Joachim von Schéele Matériaux & Techniques, 111 4 (2023) 405 Published online: 14 décembre 2023
425	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
394	Materials and Society: transitions in society, materials and energy Free Access How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Published online: 26 avril 2021
195	Special Issue on ‘Recent advances of the French research on the biodeterioration of materials’, edited by Françoise Feugeas, Bernard Tribollet, Christine Lors, Marc Jeannin and Hervé Gueuné Open Access Étude de la spéciation dans l’eau de mer de l’aluminium et du zinc libérés par la dissolution d’une anode galvanique Alexandre Levallois, Laureen Nivelais, Olivier Basuyaux, Katherine Costil, Antoine Serpentini and Christelle Caplat Matériaux & Techniques, 110 6 (2022) 605 Published online: 12 avril 2023
175	Special Issue on ‘Advances in Steel Technologies’, edited by Carlo Mapelli, Silvia Barella and Riccardo Carli Open Access Advancing hydrogen plasma smelting reduction: Experimental insights from a pilot plant Bernhard Adami, Manuel A. Farkas, Johannes Schenk and Michael A. Zarl Matériaux & Techniques, 114 1 (2026) 105 Published online: 11 mars 2026

Volume 114 / Numéro 4 (2026) (in progress)
See the table of contents
Volume 114 / Numéro 3 (2026)
Caption: Hydrogen Steel Mill: a futuristic representation (© 2025. All rights reserved)
See the table of contents
Volume 114 / Numéro 2 (2026)
Caption: High-precision fabrication of a lattice cube, showcasing advanced materials processing and smart manufacturing
See the table of contents
Volume 114 / Numéro 1 (2026)
Caption: SEM-EDS mapping of carbothermically reduced rotary kiln slag (© Gianluca Dall'Osto, Carlo Mapelli and Davide Mombelli - Dipartimento di Meccanica, Politecnico di Milano)
See the table of contents
Volume 113 / Numéro 5-6 (2025)
High-precision fabrication of a lattice cube, showcasing advanced materials processing and smart manufacturing
See the table of contents

Recent articles (published in the past 5 years)

24	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
24	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Open Access Hydrogen steelmaking. Part 1: Physical chemistry and process metallurgy Fabrice Patisson, Olivier Mirgaux and Jean-Pierre Birat Matériaux & Techniques, 109 3-4 (2021) 303 Published online: 3 février 2022
23	Special Issue on ‘Materials and Society: the circular economy, design for circularity and industrial symbiosis’, edited by Jean-Pierre Birat, Gaël Fick, Nicolas Perry, Andrea Declich, Leiv Kolbensein, Dominique Millet and Thecle Alix Open Access Influence of design properties of printed electronics on their environmental profile Tobias M. Prenzel, Florian Gehring, Franziska Fuhs and Stefan Albrecht Matériaux & Techniques, 109 5-6 (2021) 506 Published online: 10 mai 2022
19	Review A review on the influence of natural-synthetic fibre hybrid reinforced polymer composites for bulletproof and ballistic applications Dennis O. Bichang’a, Oladunni O. Alabi, Isiaka O. Oladele, Fatai O. Aramide, Adeolu A. Adediran and Patricia A.I. Popoola Matériaux & Techniques, 110 5 (2022) 503 Published online: 5 octobre 2022
17	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Feasibility study for the utilization of natural gas and hydrogen blends on industrial furnaces Irene Luzzo, Filippo Cirilli, Guido Jochler, Alessio Gambato, Jacopo Longhi and Gabriele Rampinini Matériaux & Techniques, 109 3-4 (2021) 306 Published online: 18 février 2022

Facteur d'impact 2025 : 0,9
Facteur d'impact à 5 ans 2025 : 0,9

*Journal Citation Reports™ from Clarivate, 2026

Inscrivez-vous aux alertes courriels

Éditeur en chef : Jean-Pierre Birat
Rédacteur en chef adjoint : Xavier Colin

ISSN : 0032-6895 - eISSN : 1778-3771

News

More News

Nouveaux livres

Accédez à notre sélection de livres

1653	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
1583	Materials and Society: transitions in society, materials and energy Free Access How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Published online: 26 avril 2021
615	Special Issue on ‘The role of Hydrogen in the transition to a sustainable steelmaking process’; edited by Ismael Matino and Valentina Colla Open Access Pathways towards full use of hydrogen as reductant and fuel Joachim von Schéele Matériaux & Techniques, 111 4 (2023) 405 Published online: 14 décembre 2023
528	Special Issue on ‘Glass in our daily life’, edited by Xavier Capilla, Frédéric Angeli and Daniel R. Neuville Open Access Review Méthodes d’analyse des verres Charles Le Losq, Mariona Tarrago, Wilfried Blanc, Peggy Georges, Louis Hennet, Didier Zanghi, Gérald Lelong, Salomé Pannefieu and Daniel R. Neuville Matériaux & Techniques, 110 4 (2022) 403 Published online: 5 octobre 2022
436	Materials and Society: transitions in society, materials and energy Open Access The beginning and the end of the aluminium value chain Leiv Kolbeinsen Matériaux & Techniques, 108 5-6 (2020) 506 Published online: 26 avril 2021

4057	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Free Access Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson and Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Published online: 24 février 2022
3999	Materials and Society: transitions in society, materials and energy Free Access How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Published online: 26 avril 2021
1877	Materials and Society: transitions in society, materials and energy Open Access The beginning and the end of the aluminium value chain Leiv Kolbeinsen Matériaux & Techniques, 108 5-6 (2020) 506 Published online: 26 avril 2021
1611	Special Issue on ‘Glass in our daily life’, edited by Xavier Capilla, Frédéric Angeli and Daniel R. Neuville Open Access Review Méthodes d’analyse des verres Charles Le Losq, Mariona Tarrago, Wilfried Blanc, Peggy Georges, Louis Hennet, Didier Zanghi, Gérald Lelong, Salomé Pannefieu and Daniel R. Neuville Matériaux & Techniques, 110 4 (2022) 403 Published online: 5 octobre 2022