Performance of a HSLA steel produced via EAF and Arvedi ESP™ process route for the service in gaseous hydrogen
Matériaux & Techniques, 114 4 (2026) 401
Published online: 22 mai 2026
Matériaux & Techniques
La revue des matériaux industriels, leurs techniques de mise en œuvre et leur utilisation
-
-
Contribution of aluminum fibers to mortar performance: experimental approach and Weibull modeling
Matériaux & Techniques, 114 4 (2026) 402Published online: 20 mai 2026 -
Open Access
Assessment of the natural absorption of CO2 performed by steelmaking slag
Matériaux & Techniques, 114 4 (2026) 403Published online: 20 mai 2026 -
Open Access
Effect of Hydrogen as fuel for continuous annealing of AISI 316L stainless steel—annealing and pickling tests
Matériaux & Techniques, 114 3 (2026) 308Published online: 13 mai 2026 -
Free AccessEditorial
Matériaux et Techniques Editorial for 2026: Where does the journal wish to go?
Matériaux & Techniques, 114 3 (2026) E1Published online: 23 avril 2026 -
Open Access
Stakeholder engagement in hubs for circularity in Europe
Matériaux & Techniques, 114 3 (2026) 307Published online: 21 avril 2026 -
Enhancing structural and thermal properties of low-density polyethylene waste using dolomite and calcite mineral fillers
Matériaux & Techniques, 114 3 (2026) 303Published online: 25 mars 2026
| 717 |
Free Access
How to tell the story of change and transition of the energy, ecological and societal systemsMatériaux & Techniques, 108 5-6 (2020) 502
Published online: 26 avril 2021
|
| 494 |
Free Access
Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issuesMatériaux & Techniques, 109 3-4 (2021) 307
Published online: 24 février 2022
|
| 346 |
Open Access
The beginning and the end of the aluminium value chainMatériaux & Techniques, 108 5-6 (2020) 506
Published online: 26 avril 2021
|
| 339 |
Free Access
Review
Net-Zero transition in the steel sector: beyond the simple emphasis on hydrogen, did we miss anything?Matériaux & Techniques, 111 2 (2023) 201
Published online: 14 juin 2023
|
| 281 |
Open Access
Review
Méthodes d’analyse des verresMatériaux & Techniques, 110 4 (2022) 403
Published online: 5 octobre 2022
|
-
Volume 114 / Numéro 4 (2026) (in progress)
-
Volume 114 / Numéro 3 (2026) (in progress)
-
Volume 114 / Numéro 2 (2026)
Légende : High-precision fabrication of a lattice cube, showcasing advanced materials processing and smart manufacturing
-
Volume 114 / Numéro 1 (2026)
Légende : SEM-EDS mapping of carbothermically reduced rotary kiln slag (© Gianluca Dall'Osto, Carlo Mapelli and Davide Mombelli - Dipartimento di Meccanica, Politecnico di Milano)
-
Volume 113 / Numéro 5-6 (2025)
High-precision fabrication of a lattice cube, showcasing advanced materials processing and smart manufacturing
Recent articles (published in the past 5 years)
| 23 |
Open Access
Influence of design properties of printed electronics on their environmental profileMatériaux & Techniques, 109 5-6 (2021) 506
Published online: 10 mai 2022
|
| 23 |
Free Access
Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issuesMatériaux & Techniques, 109 3-4 (2021) 307
Published online: 24 février 2022
|
| 23 |
Open Access
Hydrogen steelmaking. Part 1: Physical chemistry and process metallurgyMatériaux & Techniques, 109 3-4 (2021) 303
Published online: 3 février 2022
|
| 16 |
Review
A review on the influence of natural-synthetic fibre hybrid reinforced polymer composites for bulletproof and ballistic applicationsMatériaux & Techniques, 110 5 (2022) 503
Published online: 5 octobre 2022
|
| 15 |
Open Access
Decarbonization of the steel industry. A techno-economic analysisMatériaux & Techniques, 109 3-4 (2021) 305
Published online: 18 février 2022
|
