Numéro |
Matériaux & Techniques
Volume 83, 1995
Matériaux intelligents. Corrosion sous contrainte. Essai de dureté
|
|
---|---|---|
Page(s) | 20 - 22 | |
DOI | https://doi.org/10.1051/mattech/199583120020s | |
Publié en ligne | 21 juin 2017 |
II - Nouveaux éléments en faveur du modèle d’interaction corrosion - déformation en CSC
Experiments supporting the corrosion enhanced plasticity model
Abstract
Critical experiments have been performed to test the corrosion enhanced plasticity model proposed some years ago by T. Magnin [1]. Slow strain rate test and four points bending test on <110> and <410> 316L alloy single crystals clearly show that the macroscopically brittle fracture on the average (110) and (100) plane is in fact achieved by microcracking on {111} facets in zig-zag which is in perfect agreement with the model. The first stage of the model is also confirmed : cracks initiate inside the {111} slip band as a consequence of a localised dissolution in the {111} slip lines. Finally the hypothesis of an enhanced plasticity due to the anodic dissolution is verified. A corrosion fatigue test on 316L shows that when anodic dissolution is favoured then, at a macroscopic scale, a softening effect can be detected : it is due to vacancies which enhanced dislocations mobility.
© SIRPE 1995
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.