Numéro |
Matériaux & Techniques
Volume 78, Numéro 5, 1990
|
|
---|---|---|
Page(s) | 23 - 29 | |
DOI | https://doi.org/10.1051/mattech/199078050023 | |
Publié en ligne | 19 avril 2017 |
La caractérisation mécanique du bois par dynamostratigraphie
Wood mechanical characterization by dynamostratigraphy
1 Maître de Conférences
2 Professeur des universités, Laboratoire de Mécanique Appliquée - IUT de RENNES
Abstract
The wood mechanical characterization is difficult on account of the anisotropy of this material. A new practically non-destructive testing method, founded on the penetration strength determination of a translating and rotating drill, permits to characterize wood cohesiveness, independently of anisotropy. The measurement of average value of R(x),for a wood thickness. Δx, taking into account several rings, yields Ro. The variation-coefficient on Ro is smaller than 3 %for several tests carried out on a same sample.
The twisting moment values, C(x), connected with the drill rotation and measured by this method are more uncertain.
Dynamostratigraphy tests will have to be normalized, but from that moment it is possible to do differential tests between species or between physical or chimical treatments on a same species.
© SIRPE 1990
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.