Numéro |
Matériaux & Techniques
Volume 74, 1986
Titane
|
|
---|---|---|
Page(s) | 5 - 11 | |
DOI | https://doi.org/10.1051/mattech/198674090005s | |
Publié en ligne | 21 juin 2017 |
Relations entre la microstructure et les propriétés mécaniques à froid des alliages de titane
The influence of microstructure on the room temperature mechanical properties of titanium alloys
O.N.E.R.A.
Abstract
The influence of the main microstructural parameters on the low temperature mechanical properties of Ti alloys are reviewed. In the case of α alloys the strength depends of grain size, solid solution hardening and precipitation or dispersion hardening ; it is shown that Ti3Al containing alloys are brittle when α2 is sheared by the moving dislocations. In α + β alloys a wide variety of α and β morphologies can be obtained. It is emphasized that only the fracture touhgness is strongly dependent on the acicular or equiaxed shape of the α grains ; the ductility is a decreasing function of the primary β grain size. In actual applications the possibility of playing on the cristallographic texture can be of interest.
The various decompositions of metastable β alloys in β + ω, β + β' and β + α are described and the fragilizing role of ω briefly sketched.
© SIRPE 1986
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.