Matériaux & Techniques

Materials & Techniques - Journal of industrial materials, their implementation techniques and use

Indentation: Experimental techniques and multiscale modelling

Open Access

Editorial

Indentation : techniques expérimentales et modélisation multiéchelle

Anne Habraken, Anne Mertens, Véronique Vitry, Marie-Stéphane Colla and Eric Le Bourhis

Matériaux & Techniques, 107 2 (2019) 204

Published online: 19 April 2019
Indentation: Experimental techniques and multiscale modelling

Open Access

Contraintes résiduelles et comportement mécanique de revêtements nickel-bore

Alex Montagne, Véronique Vitry, Luiza Bonin, Muhammad Zeeshan Mughal, Marco Sebastiani, Edoardo Bemporad, Alain Iost and Mariana Henriette Staia

Matériaux & Techniques, 107 2 (2019) 205

Published online: 19 April 2019
Indentation: Experimental techniques and multiscale modelling

Open Access

Characterization of the ageing of an epoxy resin using high temperature nanoindentation

Bruno Passilly and Romain Delannoy

Matériaux & Techniques, 107 2 (2019) 206

Published online: 19 April 2019
Indentation: Experimental techniques and multiscale modelling

Mechanical properties of FeAlSi powders prepared by mechanical alloying from different initial feedstock materials

Jaroslav Čech, Petr Haušild, Miroslav Karlík, Veronika Kadlecová, Jiří Čapek, Filip Průša and Pavel Novák

Matériaux & Techniques, 107 2 (2019) 207

Published online: 19 April 2019
Image compression of surface defects of the hot-rolled steel strip using Principal Component Analysis

Adel Boudiaf, Khaled Boubendira, Khaled Harrar, Achour Saadoune, Hatem Ghodbane, Amine Dahane and Oussama Messai

Matériaux & Techniques, 107 2 (2019) 203

Published online: 15 April 2019
Durabilité des bétons des réseaux d’assainissement urbain

Mehena Oualit, Yannick Melinge, Raoul Jauberthie and M. Tahar Abadlia

Matériaux & Techniques, 107 2 (2019) 202

Published online: 11 April 2019
Prediction of impact damage in composite sandwich plates

Mohamad Abdul Wahab, Tony Jabbour and Peter Davies

Matériaux & Techniques, 107 2 (2019) 201

Published online: 10 April 2019
Society and Materials (SAM12)

(IM-)Material flow analysis for system innovation

Romain Allais and Julie Gobert

Matériaux & Techniques, 107 1 (2019) 109

Published online: 02 April 2019
Society and Materials (SAM12)

Impact of heavy metals on human toxicity using LCA: The case study of Walloon corn

Saïcha Gerbinet, Florence Van Stappen, Sandra Belboom, Eric Pezennec and Angélique Léonard

Matériaux & Techniques, 107 1 (2019) 110

Published online: 02 April 2019
Society and Materials (SAM12)

Free Access

Editorial

Special issue of Matériaux et Techniques devoted to SAM-12

Jean-Pierre Birat

Matériaux & Techniques, 107 1 (2019) 101

Published online: 21 March 2019

Most read articles

24	Assemblages Mécaniques / Mechanical Assemblies Free Access Dynamic vibration testing of fasteners: fastener self-loosening theory, vibration testing practical applications, comparison of the international standards and recommendations on how to set-up a meaningful testing protocol Franck Pichoff, Matthieu Kummel and Morten Schiff Matériaux & Techniques, 106 3 (2018) 307 Published online: 31 October 2018
13	Open Access Influence du type de démarche de fatigue multiaxiale sur la prévision de durée de vie d’un assemblage boulonné Aliou Badara Camara, Fabienne Pennec, Emmanuel Laurans, Vincent Peyronnet, Jean-Louis Robert and Abdelhamid Bouchaïr Matériaux & Techniques, 106 2 (2018) 203 Published online: 17 October 2018
12	Open Access Analyse de la dégradation thermique du Poly(éther éther cétone) Emilie Courvoisier, Yoann Bicaba and Xavier Colin Matériaux & Techniques, 105 4 (2017) 403 Published online: 19 March 2018
11	Free Access Il est temps d’agir - 24 avril 2019 : journée mondiale de la corrosion Damien Féron Matériaux & Techniques, 106 6 (2018) N1 Published online: 18 February 2019

63	Free Access La coulée continue des aciers. Un exemple de développement technique où l’étroite coopération entre métallurgistes, constructeurs et exploitants a été d’une grande fécondité - Partie III : La solidification en machine de coulée continue (CC) ; application à la coulée de quelques familles de nuances d’acier Jean Saleil and Jean Le Coze Matériaux & Techniques, 106 5 (2018) 505 Published online: 25 January 2019
63	Society and Materials (SAM12) Open Access Development of multi-value circulation based on remanufacturing Kenichi Nakajima, Mitsutaka Matsumoto, Hideyuki Murakami, Masao Hayakawa, Yasunari Matsuno and Wataru Takayanagi Matériaux & Techniques, 107 1 (2019) 103 Published online: 21 March 2019
61	Society and Materials (SAM12) Free Access Editorial Special issue of Matériaux et Techniques devoted to SAM-12 Jean-Pierre Birat Matériaux & Techniques, 107 1 (2019) 101 Published online: 21 March 2019
58	Open Access On the evaluation of dislocation densities in pure tantalum from EBSD orientation data Claude Fressengeas, Benoît Beausir, Christophe Kerisit, Anne-Laure Helbert, Thierry Baudin, François Brisset, Marie-Hélène Mathon, Rémy Besnard and Nathalie Bozzolo Matériaux & Techniques, 106 6 (2018) 604 Published online: 15 February 2019
57	Assemblages Mécaniques / Mechanical Assemblies Free Access Dynamic vibration testing of fasteners: fastener self-loosening theory, vibration testing practical applications, comparison of the international standards and recommendations on how to set-up a meaningful testing protocol Franck Pichoff, Matthieu Kummel and Morten Schiff Matériaux & Techniques, 106 3 (2018) 307 Published online: 31 October 2018

272	Open Access On the evaluation of dislocation densities in pure tantalum from EBSD orientation data Claude Fressengeas, Benoît Beausir, Christophe Kerisit, Anne-Laure Helbert, Thierry Baudin, François Brisset, Marie-Hélène Mathon, Rémy Besnard and Nathalie Bozzolo Matériaux & Techniques, 106 6 (2018) 604 Published online: 15 February 2019
189	Assemblages Mécaniques / Mechanical Assemblies Free Access Editorial Les assemblages mécaniques – Évolutions et perspectives Pierre Chalandon, Alain Daidie and Henri-Paul Lieurade Matériaux & Techniques, 106 3 (2018) 301 Published online: 07 December 2018
149	Assemblages Mécaniques / Mechanical Assemblies Free Access Nouvelle approche pour la caractérisation du dévissage et desserrage des assemblages vissés Christophe Delcher Matériaux & Techniques, 106 3 (2018) 306 Published online: 03 December 2018
139	Society and Materials (SAM11) Open Access Global distribution of material stocks: iron, copper and nickel Kenichi Nakajima, Ichiro Daigo, Keisuke Nansai, Kazuyo Matsubae, Wataru Takayanagi, Makoto Tomita and Yasunari Matsuno Matériaux & Techniques, 105 5-6 (2017) 511 Published online: 20 June 2018
130	Assemblages Mécaniques / Mechanical Assemblies Free Access Dynamic vibration testing of fasteners: fastener self-loosening theory, vibration testing practical applications, comparison of the international standards and recommendations on how to set-up a meaningful testing protocol Franck Pichoff, Matthieu Kummel and Morten Schiff Matériaux & Techniques, 106 3 (2018) 307 Published online: 31 October 2018

Matériaux & Techniques

Indentation : techniques expérimentales et modélisation multiéchelle

Contraintes résiduelles et comportement mécanique de revêtements nickel-bore

Characterization of the ageing of an epoxy resin using high temperature nanoindentation

Mechanical properties of FeAlSi powders prepared by mechanical alloying from different initial feedstock materials

Image compression of surface defects of the hot-rolled steel strip using Principal Component Analysis

Durabilité des bétons des réseaux d’assainissement urbain

Prediction of impact damage in composite sandwich plates

(IM-)Material flow analysis for system innovation

Impact of heavy metals on human toxicity using LCA: The case study of Walloon corn

Special issue of Matériaux et Techniques devoted to SAM-12

Dynamic vibration testing of fasteners: fastener self-loosening theory, vibration testing practical applications, comparison of the international standards and recommendations on how to set-up a meaningful testing protocol

Influence du type de démarche de fatigue multiaxiale sur la prévision de durée de vie d’un assemblage boulonné

Analyse de la dégradation thermique du Poly(éther éther cétone)

Il est temps d’agir - 24 avril 2019 : journée mondiale de la corrosion

Development of multi-value circulation based on remanufacturing

Special issue of Matériaux et Techniques devoted to SAM-12

On the evaluation of dislocation densities in pure tantalum from EBSD orientation data

Dynamic vibration testing of fasteners: fastener self-loosening theory, vibration testing practical applications, comparison of the international standards and recommendations on how to set-up a meaningful testing protocol

On the evaluation of dislocation densities in pure tantalum from EBSD orientation data

Les assemblages mécaniques – Évolutions et perspectives

Nouvelle approche pour la caractérisation du dévissage et desserrage des assemblages vissés

Global distribution of material stocks: iron, copper and nickel

Dynamic vibration testing of fasteners: fastener self-loosening theory, vibration testing practical applications, comparison of the international standards and recommendations on how to set-up a meaningful testing protocol

Volume 107 / No 2 (2019) (open volume)

Volume 107 / No 1 (2019) (open volume)

Volume 106 / No 6 (2018)

Volume 106 / No 5 (2018)

Volume 106 / No 4 (2018)

News

New books