On the evaluation of dislocation densities in pure tantalum from EBSD orientation data
Matériaux & Techniques, 106 6 (2018) 604
Publié en ligne : 2019-02-15
Article cité par
La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).
Article cité :
Citations de cet article :
Role of Prior Cyclic Oxidation on Tensile Deformation Behaviour of IN 713 C Alloy
R. K. Rai, Sharat Chandra and N. PauloseMetals and Materials International 31 (2) 355 (2025)
https://doi.org/10.1007/s12540-024-01755-0
Effect of annealing on microstructure and bending springback of high-strength Al-Mg-Si-Cu alloys
Xiuhua Luo, Yifeng Li, Zibin Wu, Dongtao Wang, Haitao Zhang, Xiaotao Liu, Zhixin Feng, Xiaozu Zhang, Jing Zou, Hiromi Nagaumi and Bo ZhangMaterials Today Communications 46 112382 (2025)
https://doi.org/10.1016/j.mtcomm.2025.112382
Attribution of heterogeneous stress distributions in low-grain polycrystals under conditions leading to damage
Samuel D. Dunham, Yinling Zhang, Nan Chen, Coleman Alleman and Curt A. BronkhorstInternational Journal of Plasticity 186 104258 (2025)
https://doi.org/10.1016/j.ijplas.2025.104258
Hydrogen Embrittlement as a Conspicuous Material Challenge─Comprehensive Review and Future Directions
Haiyang Yu, Andrés Díaz, Xu Lu, Binhan Sun, Yu Ding, Motomichi Koyama, Jianying He, Xiao Zhou, Abdelali Oudriss, Xavier Feaugas and Zhiliang ZhangChemical Reviews 124 (10) 6271 (2024)
https://doi.org/10.1021/acs.chemrev.3c00624
Evolution of Electron Channelling Contrast Imaging of Plastic Deformation Induced by Berkovich Nanoindentation in Ferrite Steel
Oluwasogo Adegboyega, Nicolas Brodush, Lise Guichaoua, Richard Chromik and Raynald GauvinMicroscopy and Microanalysis 30 (Supplement_1) (2024)
https://doi.org/10.1093/mam/ozae044.259
Role of micro‐constituents on the fatigue deformation micro‐mechanisms of IN 713 C alloy
Rajesh Kumar Rai, Sharat Chandra, Biraj Kumar Sahoo and Neeta PauloseFatigue & Fracture of Engineering Materials & Structures 47 (7) 2585 (2024)
https://doi.org/10.1111/ffe.14321
Twinning behavior and variant selection mechanism of b.c.c tantalum during dynamic plastic deformation
Shiyuan Zhou, Jun Wang, Shifeng Liu, Yazhou Liu, Yan Wu, Xiaopeng Yang, Jianbo Gao and Gangqiong LiuMaterials Characterization 216 114300 (2024)
https://doi.org/10.1016/j.matchar.2024.114300
Estimating dislocation density from electron backscatter diffraction data for an AZ31/Mg-0.6Gd hybrid alloy fabricated by high-pressure torsion
Thierry Baudin, Hiba Azzeddine, François Brisset, Yi Huang and Terence G. LangdonPhilosophical Magazine 104 (6-8) 389 (2024)
https://doi.org/10.1080/14786435.2024.2308203
Dislocation–grain boundary interactions in Ta: numerical, molecular dynamics, and machine learning approaches
A. Kedharnath, Rajeev Kapoor and Apu SarkarJournal of Materials Science 59 (1) 243 (2024)
https://doi.org/10.1007/s10853-023-09167-y
Mechanisms of 45-degree Precipitate Coarsening in IN 713C Alloy During Low Cycle Fatigue Deformation at 650°C
R. K. RaiMetallography, Microstructure, and Analysis (2024)
https://doi.org/10.1007/s13632-024-01114-w
Post-irradiation examination of commercial tantalum alloys following neutron irradiation
Caleb P. Massey, Callie K. Goetz, Yan-Ru Lin, Jesse Werden, Stephanie Curlin, Thomas I. Siggillino, Steven J. Zinkle and Jeremy T. BusbyJournal of Nuclear Materials 591 154906 (2024)
https://doi.org/10.1016/j.jnucmat.2024.154906
Laser powder bed fusion of molybdenum under various Ar N2 mixture build atmospheres
Tejas Ramakrishnan, Sunyong Kwon and Mathieu BrochuInternational Journal of Refractory Metals and Hard Materials 119 106556 (2024)
https://doi.org/10.1016/j.ijrmhm.2024.106556
Al-12Si Alloy Fabricated Via Selective Laser Melting: Residual Stress and Microstructural Factors after Heat Treatment
Seonghwan Park, Sang Hoon Kim, Jiyong Park and Eunkyung LeeJournal of Materials Engineering and Performance 33 (5) 2156 (2024)
https://doi.org/10.1007/s11665-023-08141-8
EBSD analysis and mechanical properties of low-carbon steel during drawing with shear deformation
Hiba Azzeddine, Anatoliy Zavdoveev, François Brisset, Sviatoslav Motrunich, Olena Pashinska and Thierry BaudinMaterials Today Communications 40 110100 (2024)
https://doi.org/10.1016/j.mtcomm.2024.110100
Investigation of microstructural evolution in a hybrid additively manufactured steel bead
Md. Anwar Ali Anshari, Rajnish Mishra and Murshid ImamInternational Journal of Materials Research 114 (10-11) 965 (2023)
https://doi.org/10.1515/ijmr-2022-0152
Searching for medium entropy alloys with desired mechanical property by adaptive design combined with experiments
Xuefei Wang, Hong Luo, Qiancheng Zhao, Hongxu Cheng, Zhimin Pan and Xiaogang LiInternational Journal of Refractory Metals and Hard Materials 114 106246 (2023)
https://doi.org/10.1016/j.ijrmhm.2023.106246
Experimental measurement of dislocation density in metallic materials: A quantitative comparison between measurements techniques (XRD, R-ECCI, HR-EBSD, TEM)
J. Gallet, M. Perez, R. Guillou, C. Ernould, C. Le Bourlot, C. Langlois, B. Beausir, E. Bouzy, T. Chaise and S. CazottesMaterials Characterization 199 112842 (2023)
https://doi.org/10.1016/j.matchar.2023.112842
A Study of the Mechanical Properties of Al6061-Zr1,2 Alloy Processed by Laser Beam Melting
Mathieu Opprecht, Guilhem Roux, Jean-Paul Garandet and Camille FlamentJournal of Materials Engineering and Performance 32 (4) 1840 (2023)
https://doi.org/10.1007/s11665-022-07218-0
Developing a best practice for sample preparation of additive manufactured AlSi10Mg for electron backscatter diffraction analysis
Erfan Maleki, Sara Bagherifard, Ludovica Rovatti, et al.Additive Manufacturing Letters 5 100122 (2023)
https://doi.org/10.1016/j.addlet.2023.100122
The dependency of work hardening on dislocation statistics in cold rolled 1050 aluminum alloy
Purnima Chakravarty, Gyula Pál and Jurij J. SidorMaterials Characterization 191 112166 (2022)
https://doi.org/10.1016/j.matchar.2022.112166
Effect of ball-burnishing on hydrogen-assisted cracking of a martensitic stainless steel
A. Dreano, M. Alnajjar, F. Salvatore, J. Rech, C. Bosch, K. Wolski, G. Kermouche and F. ChristienInternational Journal of Hydrogen Energy 47 (93) 39654 (2022)
https://doi.org/10.1016/j.ijhydene.2022.09.110
Microstructural evolution and ultrafine-grain formation during dynamic shear in pure tantalum
Shiyuan Zhou, Haoyan Tan, Shifeng Liu, et al.Materials Characterization 186 111820 (2022)
https://doi.org/10.1016/j.matchar.2022.111820
Evolution of geometrically necessary dislocation at the γ-γ′ interface and its effect on tensile deformation behaviour of disk super alloy
P.S.M. Jena, S.K. Pradhan, S. Tripathy, et al.Materials Science and Engineering: A 807 140855 (2021)
https://doi.org/10.1016/j.msea.2021.140855
A stored energy analysis of grains with shear texture orientations in Cu-Ni-Si and Fe-Ni alloys processed by high-pressure torsion
Hiba Azzeddine, Thierry Baudin, Anne-Laure Helbert, François Brisset, Yi Huang, Megumi Kawasaki, Djamel Bradai and Terence G. LangdonJournal of Alloys and Compounds 864 158142 (2021)
https://doi.org/10.1016/j.jallcom.2020.158142
Nonlinear ultrasonic technique for the characterization of microstructure in additive materials
Aurelio Bellotti, Jin-Yeon Kim, Joseph E. Bishop, Bradley H. Jared, Kyle Johnson, Donald Susan, Philip J. Noell and Laurence J. JacobsThe Journal of the Acoustical Society of America 149 (1) 158 (2021)
https://doi.org/10.1121/10.0002960
Achieving good tensile properties in ultrafine grained nickel by spark plasma sintering
Lucía García de la Cruz, Mayerling Martinez, Clément Keller and Eric HugMaterials Science and Engineering: A 772 138770 (2020)
https://doi.org/10.1016/j.msea.2019.138770