EDP Sciences logo
Authentification abonné
Rechercher
Menu
Accueil Tous les numéros Volume 112 / Numéro 5 (2024) Matériaux & Techniques, 112 5 (2024) 502 Références
Numéro
Matériaux & Techniques
Volume 112, Numéro 5, 2024
Special Issue on ‘Circular Economy initiatives and solutions in the steel sector’, edited by Valentina Colla and Ismael Matino
Numéro d'article 502
Nombre de pages 10
Section Materials production and processing
DOI https://doi.org/10.1051/mattech/2024022
Publié en ligne 21 novembre 2024
  1. T. Taylor, A. Clough, Critical review of automotive hot-stamped sheet 414 steel from an industrial perspective, Mater. Sci. Technol. 415, 809–861 (2018) [CrossRef] [Google Scholar]
  2. M. Andreotti, C. Brondi, D. Micillo, R. Zevenhoven, J. Rieger, A. Jo, A. -L. Hettinger, J. Bollen, E. Malfa, C. Trevisan, K. Peters, D. Snaet, A. Ballarino, Sdgs in the eu steel sector: a critical review of sustainability initiatives and approaches, Sustainability 15, 7521 (2023) [CrossRef] [Google Scholar]
  3. C.-C. Cormos, Evaluation of reactive absorption and adsorption systems for post-combustion CO2 capture applied to iron and steel industry, Appl. Thermal Eng. 105, 56–64 (2016) [CrossRef] [Google Scholar]
  4. D. Koolen, D. Vidovic, Greenhouse gas intensities of the eu steel industry and its trading partners eur 31112 en, tech. rep., Publications Office of the European Union (Luxembourg, 2022). [Google Scholar]
  5. D.T. Llewellyn, J. B. Marriott, D.J. Naylor, G. Thewlis, The effects of residual elements on the properties of engineering steels, Philos. Trans. Royal Society of Lond. Ser. A 295, 69–85 (1980) [CrossRef] [Google Scholar]
  6. K. Nakajima, O. Takeda, M. T, M. K, T. Nagasaka, Thermodynamic analysis for the controllability of elements in the recycling process of metals, Environ. Sci. Technol. 45, 4929–4936 (2011) [CrossRef] [Google Scholar]
  7. H. bing Peng, W. qing Chen, L. Chen, D. Guo, Influence of different levels of Cu equivalent on the hot ductility of CrMnTi steel, High Temperat. Mater. Processes 34, 399–405 (2015) [Google Scholar]
  8. J. Calvo-Muñoz. Universitat Politècnica de Catalunya, Departament de Ciència dels Materials i Enginyeria Metal., lúrgica, Efecto de los elementos residuales e impurezas en la ductilidad y mecanismos de fragilización en caliente de un acero de construcción F 0.23C-0.9Mn-0.13Si. (UPC, 2006) [Google Scholar]
  9. C.-H. Li, C.-Y. Chen, S.-P. Tsai, J.-R. Yang, Microstructure characterization and strengthening behavior of dual precipitation particles in Cu-Ti microalloyed dual phase steels, Mater. Des. 166, 107613 (2019) [CrossRef] [Google Scholar]
  10. K. Noro, M. Takeuchi, Y. Mizukami, Necessity of scrap reclamation technologies and present conditions of technical development, ISIJ Int. 37, 198–206 (1997) [CrossRef] [Google Scholar]
  11. K.E. Daehn, A.C. Serrenho, J.M. Allwood, How will copper contamination constrain future global steel recycling?, Environ. Sci. Technol. 51, 6599–6606 (2017) [CrossRef] [Google Scholar]
  12. S. Dworak, H. Rechberger, J. Fellner, How will tramp elements affect future steel recycling in Europe? a dynamic material flow model for steel in the eu-28 for the period 1910 to 2050, Resour. Conserv. Recycl, 179, 106072 (2022). [Google Scholar]
  13. H. Karbasian, A. Tekkaya, A review on hot stamping, J. Mater. Process. Technology, 210, 2103–2118, (2010). [CrossRef] [Google Scholar]
  14. A. Nagathan, L. Penter, Chapter 7: Hot stamping, in Sheet Metal Forming—Processes and Applications, edited by T. Altan and A. Tekkaya (ASM International, 2012), pp. 153–163 [Google Scholar]
  15. G. Georgiadis, A. Tekkaya, P. Weigert, J. Weiher, H. Kurz, Investigations on the manufacturability of thin press hardened steel components, Proc. CIRP, vol. 18, pp. 74–79, 2014 [CrossRef] [Google Scholar]
  16. A. R. Chezan, E. H. Atzema, J. Pilthammar, M. Sigvant, Material variability effects on automotive part production process, IOP Conf Ser.: Mater. Sci. Eng. 1284 012037. [Google Scholar]
  17. E. Garcia-Llamas, J. Pujante, D. Frómeta, D. Corón, L. Galceran, S. Golling, C. Seijas, D. Casellas, Optimization of thick 22mnb5 sheet steel part performance through laser tempering, Metals 13, 396 (2023) [CrossRef] [Google Scholar]
  18. M. da Silva, J. Pujante, J. Hrabia-Wisnios, B. Augustyn, D. Kapinos, M. Wegrzyn, S. Boczkal, Analysis of inclusions and impurities present in typical HPDC, stamping and extrusion alloys produced with different scrap levels, Metals 14, 626 (2024) [Google Scholar]
  19. Eu27 steel scrap specification, tech. rep., EFR, European Ferrous Recovery and recycling Federation, (Brussels, Belgium, 2007) [Google Scholar]
  20. ASM international. Handbook committee, Metals Handbook: Irons, Steels, and High-performance Alloys. Properties and selection. No. 1, (ASM International, 1990) [Google Scholar]
  21. E. Garcia-Llamas, J. Pujante, P. Torres, F. Bonada, A thermography-based online control method for press hardening, IOP Conf. Ser.: Mater. Sci. Eng. 1157, 012010 (2021) [CrossRef] [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.