Numéro |
Matériaux & Techniques
Volume 107, Numéro 2, 2019
Indentation: Experimental techniques and multiscale modelling
|
|
---|---|---|
Numéro d'article | 205 | |
Nombre de pages | 6 | |
Section | Essais, mesure, contrôle non destructif / Testing, measurement and non destructive testing | |
DOI | https://doi.org/10.1051/mattech/2019016 | |
Publié en ligne | 19 avril 2019 |
- Directive 2011 /65/UE du Parlement européen et du Conseil du 8 juin 2011 relative à la limitation de l’utilisation de certaines substances dangereuses dans les équipements électriques et électroniques [Google Scholar]
- A. Brenner, G.E. Riddell, Nickel plating on steel by chemical reduction, J. Res. NBS 37(1), 31 (1946) [Google Scholar]
- P. Sahoo, S.K. Das, Tribology of electroless nickel coatings − A review, Mater. Des. 32(4), 1760 (2011) [CrossRef] [Google Scholar]
- V. Vitry, A.-F. Kanta, F. Delaunois, Mechanical and wear characterization of electroless nickel-boron coatings, Surf. Coat. Technol. 206(7), 1879 (2011) [CrossRef] [Google Scholar]
- J. Sudagar, J. Lian, W. Sha, Electroless nickel, alloy, composite and nano coatings − A critical review, J. Alloys Compd. 571, 183 (2013) [CrossRef] [Google Scholar]
- M. Sebastiani, E. Bemporad, F. Carassiti, On the influence of residual stress on nano-mechanical characterization of thin coatings, J. Nanosci. Nanotechnol. 11(10), 8864 (2011) [CrossRef] [Google Scholar]
- H.K. Tönshoff, B. Karpuschewski, A. Mohlfeld, H. Seegers, Influence of stress distribution on adhesion strength of sputtered hard coatings, Thin Solid Films 332(1–2), 146 (1998) [CrossRef] [Google Scholar]
- A.M. El-Sherik, J. Shirokoff, U. Erb, Stress measurements in nanocrystalline Ni electrodeposits, J. Alloys Compd. 389(1–2), 140 (2005) [CrossRef] [Google Scholar]
- P.J. Withers, H.K.D.H. Bhadeshia, Residual stress. Part 1–Measurement techniques, Mater. Sci. Technol. 17(4), 355 (2001) [Google Scholar]
- J. Jang, Estimation of residual stress by instrumented indentation: a review, J. Ceram. Process. Res. 10(3), 391 (2009) [Google Scholar]
- F. Delaunois, J.P. Petitjean, P. Lienard, M. Jacob-Duliere, Autocatalytic electroless nickel-boron plating on light alloys, Surf. Coat. Technol. 124(2–3), 201 (2000) [CrossRef] [Google Scholar]
- F. Delaunois, P. Lienard, Heat treatments for electroless nickel-boron plating on aluminium alloys, Surf. Coat. Technol. 160(2–3), 239 (2002) [CrossRef] [Google Scholar]
- A.-F. Kanta, V. Vitry, F. Delaunois, Effect of thermochemical and heat treatments on electroless nickel-boron, Mater. Lett. 63(30), 2662 (2009) [CrossRef] [Google Scholar]
- V. Vitry, F. Delaunois, C. Dumortier, Mechanical properties and scratch test resistance of nickel-boron coated aluminium alloy after heat treatments, Surf. Coat. Technol. 202(14), 3316 (2008) [CrossRef] [Google Scholar]
- W.C. Oliver, G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res. 7, 1564 (1992) [NASA ADS] [CrossRef] [Google Scholar]
- M. Sebastiani, C. Eberl, E. Bemporad, G.M. Pharr, Depth-resolved residual stress analysis of thin coatings by a new FIB-DIC method, Mater. Sci. Eng. A 528(27), 7901 (2011) [CrossRef] [Google Scholar]
- A.M. Korsunsky, M. Sebastiani, E. Bemporad, Focused ion beam ring drilling for residual stress evaluation, Mater. Lett. 63(22), 1961 (2009) [CrossRef] [Google Scholar]
- M. Yetna N’Jock, et al., Un critère simple d’identification du mode de déformation par indentation, Mater. Tech. 103(6), 603 (2015) [CrossRef] [Google Scholar]
- J.L. Loubet, J.M. Georges, O. Marchesini, G. Meille, Vickers indentation curves of magnesium oxide (MgO), J. Tribol. 106(1), 43 (1984) [CrossRef] [Google Scholar]
- A.M. Korsunsky, M. Sebastiani, E. Bemporad, Residual stress evaluation at the micrometer scale: Analysis of thin coatings by FIB milling and digital image correlation, Surf. Coat. Technol. 205(7), 2393 (2010) [CrossRef] [Google Scholar]
- V. Vitry, A. Sens, A.-F. Kanta, F. Delaunois, Experimental study on the formation and growth of electroless nickel-boron coatings from borohydride-reduced bath on mild steel, Appl. Surf. Sci. 263, 640 (2012) [CrossRef] [Google Scholar]
- V. Vitry, F. Delaunois, C. Dumortier, How heat treatment can give better properties to electroless nickel-boron coatings, Metall. Ital. 101(4), 2009 [Google Scholar]
- L. Bonin, Replacement of lead stabilizer in electroless Nickel-Boron baths: New composition of green baths with properties characterization, Thesis, Université de Mons, Mons, 2018 [Google Scholar]
- V. Vitry, A.-F. Kanta, J. Dille, F. Delaunois, Structural state of electroless nickel-boron deposits (5 wt.% B): Characterization by XRD and TEM, Surf. Coat. Technol. 206(16), 3444 (2012) [CrossRef] [Google Scholar]
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.