Issue
Matériaux & Techniques
Volume 107, Number 2, 2019
Indentation: Experimental techniques and multiscale modelling
Article Number 205
Number of page(s) 6
Section Essais, mesure, contrôle non destructif / Testing, measurement and non destructive testing
DOI https://doi.org/10.1051/mattech/2019016
Published online 19 April 2019
  1. Directive 2011 /65/UE du Parlement européen et du Conseil du 8 juin 2011 relative à la limitation de l’utilisation de certaines substances dangereuses dans les équipements électriques et électroniques [Google Scholar]
  2. A. Brenner, G.E. Riddell, Nickel plating on steel by chemical reduction, J. Res. NBS 37(1), 31 (1946) [Google Scholar]
  3. P. Sahoo, S.K. Das, Tribology of electroless nickel coatings − A review, Mater. Des. 32(4), 1760 (2011) [CrossRef] [Google Scholar]
  4. V. Vitry, A.-F. Kanta, F. Delaunois, Mechanical and wear characterization of electroless nickel-boron coatings, Surf. Coat. Technol. 206(7), 1879 (2011) [CrossRef] [Google Scholar]
  5. J. Sudagar, J. Lian, W. Sha, Electroless nickel, alloy, composite and nano coatings − A critical review, J. Alloys Compd. 571, 183 (2013) [CrossRef] [Google Scholar]
  6. M. Sebastiani, E. Bemporad, F. Carassiti, On the influence of residual stress on nano-mechanical characterization of thin coatings, J. Nanosci. Nanotechnol. 11(10), 8864 (2011) [CrossRef] [Google Scholar]
  7. H.K. Tönshoff, B. Karpuschewski, A. Mohlfeld, H. Seegers, Influence of stress distribution on adhesion strength of sputtered hard coatings, Thin Solid Films 332(1–2), 146 (1998) [CrossRef] [Google Scholar]
  8. A.M. El-Sherik, J. Shirokoff, U. Erb, Stress measurements in nanocrystalline Ni electrodeposits, J. Alloys Compd. 389(1–2), 140 (2005) [CrossRef] [Google Scholar]
  9. P.J. Withers, H.K.D.H. Bhadeshia, Residual stress. Part 1–Measurement techniques, Mater. Sci. Technol. 17(4), 355 (2001) [CrossRef] [Google Scholar]
  10. J. Jang, Estimation of residual stress by instrumented indentation: a review, J. Ceram. Process. Res. 10(3), 391 (2009) [Google Scholar]
  11. F. Delaunois, J.P. Petitjean, P. Lienard, M. Jacob-Duliere, Autocatalytic electroless nickel-boron plating on light alloys, Surf. Coat. Technol. 124(2–3), 201 (2000) [CrossRef] [Google Scholar]
  12. F. Delaunois, P. Lienard, Heat treatments for electroless nickel-boron plating on aluminium alloys, Surf. Coat. Technol. 160(2–3), 239 (2002) [CrossRef] [Google Scholar]
  13. A.-F. Kanta, V. Vitry, F. Delaunois, Effect of thermochemical and heat treatments on electroless nickel-boron, Mater. Lett. 63(30), 2662 (2009) [CrossRef] [Google Scholar]
  14. V. Vitry, F. Delaunois, C. Dumortier, Mechanical properties and scratch test resistance of nickel-boron coated aluminium alloy after heat treatments, Surf. Coat. Technol. 202(14), 3316 (2008) [CrossRef] [Google Scholar]
  15. W.C. Oliver, G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res. 7, 1564 (1992) [NASA ADS] [CrossRef] [Google Scholar]
  16. M. Sebastiani, C. Eberl, E. Bemporad, G.M. Pharr, Depth-resolved residual stress analysis of thin coatings by a new FIB-DIC method, Mater. Sci. Eng. A 528(27), 7901 (2011) [CrossRef] [Google Scholar]
  17. A.M. Korsunsky, M. Sebastiani, E. Bemporad, Focused ion beam ring drilling for residual stress evaluation, Mater. Lett. 63(22), 1961 (2009) [CrossRef] [Google Scholar]
  18. M. Yetna N’Jock, et al., Un critère simple d’identification du mode de déformation par indentation, Mater. Tech. 103(6), 603 (2015) [CrossRef] [Google Scholar]
  19. J.L. Loubet, J.M. Georges, O. Marchesini, G. Meille, Vickers indentation curves of magnesium oxide (MgO), J. Tribol. 106(1), 43 (1984) [CrossRef] [Google Scholar]
  20. A.M. Korsunsky, M. Sebastiani, E. Bemporad, Residual stress evaluation at the micrometer scale: Analysis of thin coatings by FIB milling and digital image correlation, Surf. Coat. Technol. 205(7), 2393 (2010) [CrossRef] [Google Scholar]
  21. V. Vitry, A. Sens, A.-F. Kanta, F. Delaunois, Experimental study on the formation and growth of electroless nickel-boron coatings from borohydride-reduced bath on mild steel, Appl. Surf. Sci. 263, 640 (2012) [CrossRef] [Google Scholar]
  22. V. Vitry, F. Delaunois, C. Dumortier, How heat treatment can give better properties to electroless nickel-boron coatings, Metall. Ital. 101(4), 2009 [Google Scholar]
  23. L. Bonin, Replacement of lead stabilizer in electroless Nickel-Boron baths: New composition of green baths with properties characterization, Thesis, Université de Mons, Mons, 2018 [Google Scholar]
  24. V. Vitry, A.-F. Kanta, J. Dille, F. Delaunois, Structural state of electroless nickel-boron deposits (5 wt.% B): Characterization by XRD and TEM, Surf. Coat. Technol. 206(16), 3444 (2012) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.