EDP Sciences logo
Authentification abonné
Rechercher
Menu
Accueil Tous les numéros Volume 106 / Numéro 4 (2018) Matériaux & Techniques, 106 4 (2018) 405 Références
Open Access
Numéro
Matériaux & Techniques
Volume 106, Numéro 4, 2018
Numéro d'article 405
Nombre de pages 8
Section Sélection des matériaux et des procédés / Materials and processes selection
DOI https://doi.org/10.1051/mattech/2018050
Publié en ligne 5 décembre 2018
  1. L.C. Zhang, H. Attar, Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review, Adv. Eng. Mater. 18, 463 (2016) [CrossRef] [Google Scholar]
  2. B. Vrancken, L. Thijs, J.P. Kruth, J. Van Humbeeck, Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting, Acta Mater. 68, 150 (2014) [CrossRef] [Google Scholar]
  3. Y.J. Liu, X.P. Li, L.C. Zhang, T.B. Sercombe, Processing and properties of topologically optimised biomedical Ti-24Nb-4Zr-8Sn scaffolds manufactured by selective laser melting, Mater. Sci. Eng. A 642, 268 (2015) [CrossRef] [Google Scholar]
  4. E. Chlebus, B. Kuźnicka, R. Dziedzic, T. Kurzynowski, Titanium alloyed with rhenium by selective laser melting, Mater. Sci. Eng. A 620, 155 (2015) [CrossRef] [Google Scholar]
  5. Y. Zhou, S.F. Wen, B. Song, X. Zhou, Q. Teng, Q.S. Wei, Y.S. Shei, A novel titanium alloy manufactured by selective laser melting: microstructure, high-temperature oxidation resistance, Mater. Des. 89, 1199 (2016) [CrossRef] [Google Scholar]
  6. M. Fischer, D. Joguet, G. Robin, L. Peltier, P. Laheurte, In situ elaboration of a binary Ti-26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders, Mater. Sci. Eng. C 62, 852 (2016) [CrossRef] [Google Scholar]
  7. L. Yan, Y. Yuan, L. Ouyang, H. Li, A. Mirzasadeghi, L. Li, Improved mecha-nical properties of the new Ti-15Ta-xZr alloys fabricated by selective laser melting for biomedical application, J. Alloys Compd. 688, 156 (2016) [CrossRef] [Google Scholar]
  8. T. Ishimoto, K. Hagihara, K. Hisamoto, S.H. Sun, T. Nakano, Crystallographic texture control of beta-type Ti-15Mo-5Zr-3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young’s modulus, Scr. Mater. 132, 34 (2017) [Google Scholar]
  9. K. Wei, Z. Wang, X. Zeng, Preliminary investigation on selective laser melting of Ti-5Al-2.5Sn C-Ti alloy: From single tracks to bulk 3D components, J. Mater. Process. Technol. 244, 73 (2017) [CrossRef] [Google Scholar]
  10. W. Serbiński, A. Zieliński, T. Seramak, A. Ossowska, S. Sobieszczyk, M. Supernak, B. Majkowska, Surface treatment of porous Ti-13Nb-13Zr alloy for biomedical applications, Inżynieria Mater. 185, 6 (2012) [Google Scholar]
  11. P.K. Maji, A.J. Banerjee, P.S. Banerjee. S. Karmakar, Additive manufacturing in prosthesis development – a case study, Rapid Prototyp. J. 20, 480 (2014) [CrossRef] [Google Scholar]
  12. D. Joguet, S. Costil, H. Liao, Y. Danlos, Porosity content control of CoCrMo and titanium parts by Taguchi method applied to selective laser melting process parameter, Rapid Prototyp. J. 22, 20 (2016) [CrossRef] [Google Scholar]
  13. L.Y. Chen, J.C. Huang, C.H. Lin, et al., Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting, Mater. Sci. Eng. A 682, 389 (2017) [CrossRef] [Google Scholar]
  14. A.R. Lapcevic, D.P. Jevremovic, T.M. Puskar, et al., Comparative analysis of structure and hardness of cast and direct metal laser sintering produced Co-Cr alloys used for dental devices, Rapid Prototyp. J. 22, 144 (2016) [CrossRef] [Google Scholar]
  15. M. Fantini, F. De Crescenzio, L. Ciocca, F. Persiani, Additive manufacturing to assist prosthetically guided bone regeneration of atrophic maxillary arches, Rapid Prototyp. J. 24, 705 (2015) [CrossRef] [Google Scholar]
  16. P.J.T. Conradie, D. Dimitrov, G.A. Oosthuizen, et al., Comparative assessment of process combination for Ti6Al4V components, Rapid Prototyp. J. 23, 624 (2017) [CrossRef] [Google Scholar]
  17. H. Hassanin, et al., Net-shape manufacturing using hybrid selective laser melting/hot isostatic pressing, Rapid Prototyp. J. 23, 720 (2017) [CrossRef] [Google Scholar]
  18. Q. Zhang, et al., Microstructure and mechanical properties of Ti6Al4V alloy prepared by selective laser melting combined with precision forging, Trans. Nonferrous Met. Soc. China 27, 1036 (2017) [CrossRef] [Google Scholar]
  19. A.M. Khorasani, I. Gibson. M. Goldberg, G. Littlefair, On the role of different annealing heat treatments on mechanical properties and microstructure of selective laser melted and conventional wrought Ti-6Al-4V, Rapid Prototyp. J. 23, 295 (2017) [CrossRef] [Google Scholar]
  20. E. Santos, et al., Fabrication of titanium dental implants by selective laser melting, Proc. SPIE 5662, 5th Intl. Symp. Laser Precision Microfabr., 2004 [Google Scholar]
  21. B. Gao, J. Wu, X. Zhao, H. Tan, Fabricating titanium denture base plate by laser rapid forming, Rapid Prototyp. J. 15, 133 (2009) [CrossRef] [Google Scholar]
  22. Y. Yang, J.-B. Lu, Z.-Y. Luo, D. Wang, Accuracy and density optimization in directly fabricating customized orthodontic production by selective laser melting, Rapid Prototyp. J. 18, 482 (2012) [CrossRef] [Google Scholar]
  23. M. Kanazawa, M. Iwaki, S. Minakuchi, N. Nomura, Fabrication of titanium alloy frameworks for complete dentures by selective laser melting, J. Prosthet. Dentistry 112, 1441 (2014) [CrossRef] [Google Scholar]
  24. N.K. Tolochko, et al., Mechanisms of selective laser sintering and heat transfer in Ti powder, Rapid Prototyp. J. 9, 314 (2003) [CrossRef] [Google Scholar]
  25. B. Vandenbroucke, J.-P. Kruth, Selective laser melting of biocompatible metals for rapid manufacturing of medical parts, Rapid Prototyp. J. 13, 196 (2007) [CrossRef] [Google Scholar]
  26. T. Marcu, et al., Selective laser melting of Ti6Al7Nb with hydroxyapatite addition, Rapid Prototyp. J. 20, 301 (2014) [CrossRef] [Google Scholar]
  27. X.P. Li, J. Van Humbeeck, J.P. Kruth, Selective laser melting of weak-textured commercially pure titanium with high strength and ductility: A study from laser power perspective, Mater. Des. 116, 352 (2017) [CrossRef] [Google Scholar]
  28. S. Bremen, W. Meiner, A. Diatlow, Selective laser melting. A manufacturing technology for the future? Laser Technik J. 2, 33 (2012) [CrossRef] [Google Scholar]
  29. E. Chlebus, B. Kuźnicka, R. Dziedzic, T. Kurzynowski, Titanium alloyed with rhenium by selective laser melting, Mater. Sci. Eng. A 620, 155 (2015) [CrossRef] [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.