Open Access
Numéro |
Matériaux & Techniques
Volume 106, Numéro 2, 2018
|
|
---|---|---|
Numéro d'article | 202 | |
Nombre de pages | 12 | |
Section | Essais, mesure, contrôle non destructif / Testing, measurement and non destructive testing | |
DOI | https://doi.org/10.1051/mattech/2018026 | |
Publié en ligne | 21 septembre 2018 |
- J.R. Davis, Associates and ASM International, Eds., Handbook of thermal spray technology, ASM International, Materials Park, OH 2004. [Google Scholar]
- Z. Bergant, J. Grum, Porosity evaluation of flame-sprayed and heat-treated nickel-based coatings using image analysis, Image Anal. Stereol. 30, 53 (2011). [CrossRef] [Google Scholar]
- N. Serres, F. Hlawka, S. Costil, C. Langlade, F. Machi, Microstructures of metallic NiCrBSi coatings manufactured via hybrid plasma spray and in situ laser remelting process, J. Thermal Spray. Technol. 20, 336 (2011). [CrossRef] [Google Scholar]
- C. Navas, R. Colaço, J. de Damborenea, R. Vilar, Abrasive wear behaviour of laser clad and flame sprayed-melted NiCrBSi coatings, Surf. Coating Technol. 200, 6854 (2006). [CrossRef] [Google Scholar]
- S.H. Yao, Tribological behaviour of NiCrBSi-WC(Co) coatings, Mater. Res. Innovations 18, S2 (2014). [Google Scholar]
- A. Hernández Battez, J.L. Viesca, R. González, D. Blanco, E. Asedegbega, A. Osorio, Friction reduction properties of a CuO nanolubricant used as lubricant for a NiCrBSi coating, Wear 268, 325 (2010). [CrossRef] [Google Scholar]
- R.G. Munro, Material properties of titanium diboride, J. Res. Natl. Inst. Standards Technol. 105, 709 (2000). [CrossRef] [PubMed] [Google Scholar]
- O. Umanskyi, I. Hussainova, M. Storozhenko, O. Terentyev, M. Antonov, Effect of oxidation on sliding wear behavior of NiCrSiB-TiB2 plasma sprayed coatings, Key Eng. Mater. 604, 16 (2014). [CrossRef] [Google Scholar]
- O. Umanskyi, M. Storozhenko, I. Hussainova, O. Terentjev, A. Kovalchenko, M. Antonov, Effect of TiB2 additives on wear behavior of NiCrBSi-based plasma-sprayed coatings, J. Mater. Sci. 22, 15 (2016). [Google Scholar]
- S. Houdovka, E. Smazalov, V. Marek, J. Schubert, Properties of NiCrBSi coatings, as sprayed and remelted by different technologies, Surf. Coat. Technol. 253, 14 (2014). [CrossRef] [Google Scholar]
- N. Kazamer, D.T. Pascal, G. Marginean, V.A. Serban, W. Brandl, P.C. Valean, Aspects concerning the wear and corrosion of WC-CoCr and DLC systems, Nanocon 2016, Brno, Czech Republic, 2016. [Google Scholar]
- D. Chicot, M. Yetna N’Jock, E.S. Puchi-Cabrera, A. Iost, M.H. Staia, G. Louis, G. Bouscarrat, R. Aumaitre, A contact area function for Berkovich nanoindentation: application to hardness determination of a TiHfCN thin film, Thin Solid Films 558, 259 (2014). [CrossRef] [Google Scholar]
- ISO 1457 7, Metallic materials—Instrumented indentation test for hardness and materials parameters. [Google Scholar]
- W.C. Oliver, G.M. Pharr, Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology, J. Mater. Res. 19, 3 (2004). [Google Scholar]
- A.C. Fischer-Cripps, Nanoindentation testing, in Nanoindentation, Springer, New York, NY, 2011, pp. 21–37. [CrossRef] [Google Scholar]
- M. Yetna N’jock, D. Chicot, J.M. Ndjaka, J. Lesage, X. Decoopman, F. Roudet, A. Mejias, A criterion to identify sinking-in and piling-up in indentation of materials, Int. J. Mech. Sci. 90, 145 (2015). [CrossRef] [Google Scholar]
- J. Matějíček, M. Vilémová, R. Mušálek, P. Sachr, J. Horník, The influence of interface characteristics on the adhesion/cohesion of plasma sprayed tungsten coatings, Coatings 3, 108 (2013). [CrossRef] [Google Scholar]
- D.R. Glasson, J.A. Jones, Formation and reactivity of borides, carbides and silicides. I. Review and introduction J. Chem. Technol. Biotechnol. 19, 125 (1969). [Google Scholar]
- K. Aniołek, M. Kupka, A. Barylski, Sliding wear resistance of oxide layers formed on a titanium surface during thermal oxidation, Wear, 23, 356 (2016). [Google Scholar]
- J.H. Potgieter, P.A. Olubambi, L. Cornish, C.N. Machio, E.S.M. Sherif, Influence of nickel additions on the corrosion behaviour of low nitrogen 22% Cr series duplex stainless steels, Corrosion Sci. 50, 2572 (2008). [CrossRef] [Google Scholar]
- C. Li, A. Ohmori, R. McPherson, The relationship between microstructure and Young’s modulus of thermally sprayed ceramic coatings, J. Mater. Sci. 32, 997 (1997). [CrossRef] [Google Scholar]
- C.J. Li, A. Ohmori, Relationships between the microstructure and properties of thermally sprayed deposits, J. Therm. Spray. Technol. 11, 365 (2002). [CrossRef] [Google Scholar]
- J. Liu, Y. Wang, H. Li, S. Costil, R. Bolot, Numerical and experimental analysis of thermal and mechanical behavior of NiCrBSi coatings during the plasma spray process, J. Mater. Proc. Technol. 249, 471 (2017). [CrossRef] [Google Scholar]
- J. Luo, R. Stevens, Porosity-dependence of elastic moduli and hardness of 3Y-TZP ceramics, Ceram. Int. 25, 281 (1999). [CrossRef] [Google Scholar]
- A. Leyland, A. Matthews, On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour, Wear 246, 1 (2000). [CrossRef] [Google Scholar]
- B. Jönsson, S. Hogmark, Hardness measurements of thin films, Thin Solid Films 114, 257 (1984). [CrossRef] [Google Scholar]
- I. Soroka, P.J. Sereda, Interrelation of hardness, modulus of elasticity, and porosity in various gypsum systems, J. Am. Ceram. Soc. 51, 337 (1968). [CrossRef] [Google Scholar]
- A. Gouldstone, N. Chollacoop, M. Dao, J. Li, A. Minor, Y. Shen, Indentation across size scales and disciplines: recent developments in experimentation and modeling, Acta Mater. 55, 4015 (2007). [CrossRef] [Google Scholar]
- S. Cariou, F.J. Ulm, L. Dormieux, Hardness packing density scaling relations for cohesive-frictional porous materials, J. Mech. Phys. Solids 56, 924 (2008). [CrossRef] [Google Scholar]
- G.D. Quinn, P. Green, K. Xu, Cracking and the indentation size effect for Knoop hardness of glasses, J. Am. Ceram. Soc. 86, 441 (2003). [CrossRef] [Google Scholar]
- X. Chen, J.W. Hutchinson, A.G. Evans, The mechanics of indentation induced lateral cracking, J. Am. Ceram. Soc. 88, 1233 (2005). [CrossRef] [Google Scholar]
- T. Liyanage, G. Fisher, A.P. Gerlich, Influence of alloy chemistry on microstructure and properties in NiCrBSi overlay coatings deposited by plasma transferred arc welding (PTAW), Surf. Coating Technol. 205, 759 (2010). [CrossRef] [Google Scholar]
- J. Sukumaran, M. Ando, P. De Baets, V. Rodriguez, L. Szabadi, G. Kalacska, V. Paepegem, Modelling gear contact with twin-disc setup, Tribol. Int. 49, 1 (2012). [CrossRef] [Google Scholar]
- J. Sukumaran, S. Soleimani, P. De Baets, V. Rodriguez, K. Douterloigne, W. Philips, M. Ando, High-speed imaging for online micrographs of polymer composites in tribological investigation, Wear 296, 702 (2012). [CrossRef] [Google Scholar]
- A. Czifra, T. Goda, E. Garbayo, Surface characterisation by parameter-based technique, sliding method and PSD analysis, Measurement 44, 906 (2011). [CrossRef] [Google Scholar]
- B. Palásti-Kovács, Z. Néder, A. Czifra, K. Váradi, Microtopography changes in wear process, Acta Polytech. Hungarica 1, 108 (2004). [Google Scholar]
- J.F. Archard, Contact and rubbing of flat surfaces, J. Appl. Phys. 24, 981 (1953). [CrossRef] [Google Scholar]
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.