| Numéro |
Matériaux & Techniques
Volume 85, 1997
Corrosion tribocorrosion
|
|
|---|---|---|
| Page(s) | 37 - 42 | |
| DOI | https://doi.org/10.1051/mattech/199785070037s | |
| Publié en ligne | 21 juin 2017 | |
Frottement et usure de différents composites métal-céramique en milieu eau de mer
Friction and wear of different metallic ceramic composites under the influence of sea water medium
1
CTSN - MDTC - CDM. B.P. 28, 83800 Toulon Naval
2
STSN/MOB/MCR, 8, Boulevard Victor, 00303 Paris Armées
3
ECL/IFOS, B.P. 163, 69131 Ecully
Abstract
To improve the wear resistance of the Inconel alloy (625) in sea water conditions, authors have studied different carbides-metallic structures obtained with small particles (TiC or WC-Ni, WC-Co) mixed with the same matrix powder (625) and sintered by HIP.
These different MMC have been characterized by electrochemical measures in natural sea water and then by friction tests in sea water against alumina counterfaces.
The results obtained show that the friction coefficients remain high in all the situations, but an improving effect is observed for these materials, concerning a wearing reduction effect.
A good correlation has been obtained between the evolution of the electrochemical potential during friction and the friction coefficient. At the same time, the structural observations of the surfaces, after friction, show the role played by the carbide particles, which has been clearly defined in the tribological contact.
© SIRPE 1997
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.