| Issue |
Matériaux & Techniques
Volume 75, Number 10-11, 1987
|
|
|---|---|---|
| Page(s) | 425 - 429 | |
| DOI | https://doi.org/10.1051/mattech/198775100425 | |
| Published online | 19 April 2017 | |
Utilisation d’un simulateur de cuisson pour le contrôle et la mise au point des matériaux composites1
Control and set up of composite materials by using a curing simulator
1 Sté Hexcel Genin, Usine des Nappes, Les Avenières
2 Sté Prodemat, Lyon
...
Abstract
The high performance composite processing requires precise control system all along the manufacturing process : control of the evolution of raw material during stocking, control of the characteristics variations due to the producer of raw material, adjustment of curing cycle to those variations or to a new formula, control of the state of cure. Those several operations can be done by mean of a simple apparatus, the curing simulator Kinemat. It gives, to the composite processor, an advance in the total quality control process yet engaged.
© SIRPE 1987
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.