Matériaux & Techniques
Volume 107, Number 6, 2019
|Number of page(s)||7|
|Section||Sélection des matériaux et des procédés / Materials and processes selection|
|Published online||24 March 2020|
Manufacture of die and their designing parameters for sintered AMC product
Biju Patnaik University of Technology,
2 Department of Mechanical Engineering, Orissa Engineering College, Bhubaneswar, India
3 Metallurgical and Materials Engineering, IIT, Kharagpur, India
4 Raajdhani Engineering College, Bhubaneswar, India
* Corresponding author: e-mail: firstname.lastname@example.org
Accepted: 21 January 2020
The main goal in the advancement of composites with an aluminum metal matrix is to provide high performance and better mechanical properties from the currently available materials. Aluminium metal composite (AMC) can be researched and used in many industrial applications, such as manufacturing, aerospace, defense, pipelines and the automotive industry. The production of AMC is only possible with help of a suitable die in solid route of powder metallurgy process. Thus, the design of die is most important step in the process of powder metallurgy. The shape, size and design of the die directly influence the final AMC product. A number of steps and considerations like stress concentration and the propagation of cracks should be made for designing the die before its manufacture. The present work is made to attempt the fabrication and design of a cold compaction die with EN 10083 steel used for powder metallurgy process.
Key words: powder metallurgy / powder compaction / AMC / die design / die failure
© SCF, 2020
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.