Issue |
Mater. Tech.
Volume 95, Number 2, 2007
Environnement, Cycle de Vie et Recyclage des Matériaux
|
|
---|---|---|
Page(s) | 111 - 120 | |
DOI | https://doi.org/10.1051/mattech:2007036 | |
Published online | 22 January 2008 |
Régénération d'ABS et ABS-PC issus de DEEE – Résilience et mise en œuvre
Recovery of ABS and ABS-PC from WEEE – Impact strength and processing
1
Laboratoire de Génie Mécanique et Matériaux de Bordeaux, Université Bordeaux 1, 15 rue Naudet, 33175 Gradignan, France
2
Laboratoire de Photochimie Moléculaire et Macromoléculaire, Université Blaise Pascal, 63177 Aubière Cedex, France
Reçu :
15
Juin
2007
Accepté :
3
Août
2007
La valorisation des DEEE (Déchets d'Équipements Électriques et Électroniques) passe par la régénération des principales matières contenues dans ce gisement : ABS, ABS FR, ABS-PC et PC. L'étude du recyclage de l'ABS seul par broyage, extrusion et injection montre que l'extrusion après vieillissement naturel tend à dégrader le butadiène et à faire baisser la résistance au choc de l'ABS recyclé. De plus, la présence d'additifs industriels influe défavorablement sur les propriétés mécaniques de la matière recyclée. L'amélioration de la résilience de la matière recyclée en réalisant un mélange d'ABS recyclé et de PC recyclé est une piste à exploiter au regard des gisements. L'étude de l'influence des proportions d'ABS et de PC sur la résistance au choc du mélange semble montrer la nécessité d'utiliser un compatibilisant pour réaliser des mélanges performants contenant une part importante d'ABS. L'objectif à terme de notre étude est de proposer un ABS-PC recyclé pour remplacer l'ABS neuf dans des pièces pour applications électriques ou d'éclairage.
Abstract
Valorisation of WEEE (Waste Electrical and Electronical Equipment) requires the recovery of main materials constituing this deposit: ABS, ABS FR, ABS-PC et PC. A first study concerning the recycling of ABS by the way of grinding, extrusion and injection shows that extrusion and injection after ageing tend to deteriorate butadiene and affect the impact strength of recycled ABS. Moreover, the additives of these commercial materials have an unfavourable impact on the mechanical properties of the recycled material. Secondly, blending recycled ABS and recycled PC was carried out in order to enhance impact strength of recycled material. Variing the ratios of ABS and PC of the blend seems to prove the necessicity of a further compatibilization in order to produce high performance blends with a low percentage of PC. The main target of this work is to make it possible to replace ABS by recycled ABS-PC blends for electrical or lighting applications.
Mots clés : Recyclage; ABS; DEEE; mélanges ABS-PC; résilience
Key words: Recycling; ABS; WEEE; ABS-PC blends; impact strength
© EDP Sciences, 2007
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.