Issue |
Matériaux & Techniques
Volume 84, 1996
|
|
---|---|---|
Page(s) | 13 - 16 | |
DOI | https://doi.org/10.1051/mattech/199684060013s | |
Published online | 21 June 2017 |
Nitruration par échange d'ions de l'acier rapide pour outils AISI M2
Ion nitriding of AISI M2 high speed tool steel
1
Prof. Dr., Université de Kocaeli, Izmit, Kocaeli (Turquie)
2
Ingénieur de Recherches, Université d’Istanbul, Istanbul (Turquie)
3
Ingénieur de Recherches, Tubitak Mam, Kocaeli (Turquie)
Abstract
In this study, AISI M2 high speed tool steel is austenized at 1200°C, cooled in air and then double tempered at 540°C. Hardened samples are hold at the ion nitriding furnace between 500-540°C for different times. Hardened and nitrided samples were investigated for the surface structures using X-ray, microstructure of nitride layers and the hardness measurements were done. The hardness of steel surface and diffusion depth increase due to the increasing of nitriding time.
© SIRPE 1996
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.