Issue |
Matériaux & Techniques
Volume 71, Number 11-12, 1983
|
|
---|---|---|
Page(s) | 265 - 276 | |
DOI | https://doi.org/10.1051/mattech/198371110265 | |
Published online | 19 April 2017 |
La tolérance aux dommages
The damage tolerance design philosophy
Société Nationale Industrielle Aérospatiale
La sécurité et la fiabilité largement démontrées par les aéronefs reposent non seulement sur la qualité des hommes, des matériels et des matériaux utilisés pour leur réalisation, mais aussi sur des principes constructifs généraux.
Au moment de la conception, différents scénarios d’endommagement sont envisagés et pris en compte pour le dimensionnement, la taille des dommages à supporter étant liée au plan de maintenance retenu.
Prévisionnel, le comportement aux dommages devra être démontré au cours d’essais de justification en vue d’obtenir la certification.
Appelés «Fail Safe», «Safe Life», «Safe crack growth», ces différents concepts ont finalement été remplacés par le principe général de « tolérance aux dommages ».
La philosophie de ce concept et son application aux structures et aux moteurs d’aéronefs civils ou militaires seront présentées.
Une extension aux choix et à la définition de nouveaux matériaux concluera cet exposé.
Abstract
Safety and reliability largely demonstrated by aircraft are not only based on quality in men, equipment and materials used to produce them but also on general constructional concepts.
At design stage, several damage scenari are contemplated and taken into account to evaluate the size and extent of the damages to be borne in line with the maintenance plan retained.
Defined on an estimated basis, the response to damages will be demonstrated by tests in view of obtaining the Aircraft certification. So called «Fail-Safe», «Safe Life», «Safe Crack growth» all these various concepts are finally substitute by the « Damage tolerance » principle.
This concept philosophy and its application to military and civil aircraft structures and engines will be presented in this paper.
And the conclusion will be devoted to the selection and definition of new materials.
© SIRPE 1983
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.