| Issue |
Matériaux & Techniques
Volume 105, Number 3, 2017
|
|
|---|---|---|
| Article Number | 301 | |
| Number of page(s) | 13 | |
| Section | Matériaux désordonnés : verres, vitrocéramiques... / Disordered materials: glasses, clays, vitroceramics... | |
| DOI | https://doi.org/10.1051/mattech/2017033 | |
| Published online | 06 October 2017 | |
Regular Article
Stress analysis of symmetric laminates with rectangular or square holes subjected to inplane loading
1
ISAE-Cnam Liban, Department of mechanical engineering, Lebanese university,
Beirut, Lebanon
2
Faculty of engineering 1, Department of mechanical engineering, Lebanese university,
Tripoli, Lebanon
* e-mail: tjabbour@cnam.fr
Received:
10
May
2017
Accepted:
13
June
2017
In this paper we propose an analytical method for determining the behavior of symmetric laminates containing a rectangular or a square hole. This method is based on the theory developed by Savin [G.N. Savin, Stress concentration around holes, Pergamon Press, New York, 1961], for an elliptical hole, and uses the parametric representation of a given rectangle. The results obtained by this method are compared with those obtained by finite elements. This method allows the better understanding of the behavior of composite plates under inplane loading for different types of loading, different side ratios, different fillet radii, and different types of materials.
Key words: composite materials / symmetric laminate / stress concentration factor / rectangular hole / square hole
© EDP Sciences, 2017
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.