Article cité par

La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).

Article cité :

The beginning and the end of the aluminium value chain

Leiv Kolbeinsen

Matériaux & Techniques, 108 5-6 (2020) 506

Publié en ligne : 2021-04-26

DOI: https://doi.org/10.1051/mattech/2021008

Citations de cet article :

Jean-Pierre Birat
75 (2025)
https://doi.org/10.1016/B978-0-443-33732-1.00004-5

Valuable aluminum alloys obtained from secondary metallized raw materials

A. Fernandes Penya, V. Yu. Bazhin and D. V. Makushin
iPolytech Journal 28 (4) 647 (2025)
https://doi.org/10.21285/1814-3520-2024-4-648-656

Environmental impact of aluminium industry waste management in Thailand using life cycle assessment (LCA)

Pimchanok Kumnoonsate
IOP Conference Series: Earth and Environmental Science 1500 (1) 012082 (2025)
https://doi.org/10.1088/1755-1315/1500/1/012082

Assessing the economic and environmental impact of glazed façades in tropical office buildings: A case study using life cycle costing

A. Chandana Hemantha J. Thebuwena, S.M. Samindi M.K. Samarakoon and R.M.Chandima Ratnayake
Journal of Building Engineering 108 112911 (2025)
https://doi.org/10.1016/j.jobe.2025.112911

Analysing Metal Melting Methods for Green Transformation of Scrap Metal: Case Study of Latvia using MCDA and SWOT Analysis

Viktorija Terjanika, Jelena Pubule, Elina Mihailova and Beate Zlaugotne
Environmental and Climate Technologies 28 (1) 1 (2024)
https://doi.org/10.2478/rtuect-2024-0001

Synergistic pyrolysis with Refuse-Derived Fuel (RDF) can neutralize bauxite residue

Roberto Seno Júnior, Maria Cecíllia Ramos de Araújo Veloso, Rodrigo Aparecido Moreno and Fabio Minoru Yamaji
Process Safety and Environmental Protection 189 1103 (2024)
https://doi.org/10.1016/j.psep.2024.06.133

Aluminium scrap recycling in a production furnace: Minimizing dross formation for sustainable and efficient recovery

J. Gottmyers Melwyn, Bhagyanathan Chandragandhi, G. Sathiyaseelan and P. Srinath
Materials Today: Proceedings (2023)
https://doi.org/10.1016/j.matpr.2023.05.340

Influence of the iron additive on the microstructural behavior of an aluminum-copper foundry alloy B206

R. Younes, M. Bournane, A. Idir, I. Bouklouche, M. A. Bradai and A. Sadeddine
Industrial laboratory. Diagnostics of materials 89 (9) 48 (2023)
https://doi.org/10.26896/1028-6861-2023-89-9-48-52

Modeling, multi-response optimization, and performance reliability of green metal composites produced from municipal wastes

Abayomi Adewale Akinwande, Oluwatosin Abiodun Balogun and Valentin Romanovski
Environmental Science and Pollution Research 29 (40) 61027 (2022)
https://doi.org/10.1007/s11356-022-20023-5

Editorial for the special issue on: transitions in society, energy, ecology, materials and other areas

Jean-Pierre Birat, Gaël Fick, Mauro Chiappini, et al.
Matériaux & Techniques 108 (5-6) 501 (2020)
https://doi.org/10.1051/mattech/2021009