Matériaux & Techniques

La revue des matériaux industriels, leurs techniques de mise en œuvre et leur utilisation

Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Enhancing structural and thermal properties of low-density polyethylene waste using dolomite and calcite mineral fillers

Sameh Attia-Essaies, Asma Nouira, Mehdi Ismail, Najoua Barhoumi, Aymen Ben Ahmed et Ezzedine Srasra

Matériaux & Techniques, 114 3 (2026) 303

Publié en ligne : 25 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Electrophoretic deposition of hydroxyapatite coating on Ti6Al4V alloy: impact of chitosan on adhesion properties and microstructure

Jassem Kammoun, Hafedh Dhiflaoui et Naoufel Ben Moussa

Matériaux & Techniques, 114 3 (2026) 302

Publié en ligne : 24 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Effect of 3D printing parameters on the thermomechanical behavior of TPU 90A

Hanen Boubakri, Naoufel Ben Moussa, Houda Yahyaoui et Mohamed Habibi

Matériaux & Techniques, 114 3 (2026) 304

Publié en ligne : 24 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Analysis of cutting parameters for trimming carbon, glass and hybrid fiber reinforced polymer laminates using vibration monitoring and surface roughness assessment

Ezzeddine Ftoutou, Mihed Ben Said, Imed Hajjaji, Sirine Stambouli, Moez Trigui et Ated Ben Khalifa

Matériaux & Techniques, 114 3 (2026) 305

Publié en ligne : 24 mars 2026
Special Issue on ‘Opportunities and Challenges of Hydrogen Use for Steelmaking Decarbonization’, edited by Ismael Matino, Valentina Colla and Akhilesh Swarnakar

Open Access

Hydrogen plasma smelting reduction of Cr₂O₃/Chromite: challenges, insights, and initial results of direct and sustainable stainless-steel production

Mohammad Jafarzadeh, Mert Saraçoğlu, Michael A. Zarl, Daniel Ernst et Susanne K. Michelic

Matériaux & Techniques, 114 3 (2026) 306

Publié en ligne : 24 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Deep learning approach for predicting hoop-direction mechanical behavior of tubular materials in hydroforming

Zied Ktari et Ali Khalfallah

Matériaux & Techniques, 114 3 (2026) 301

Publié en ligne : 20 mars 2026
Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Multi-objective optimization of fused deposition modeling process parameters using Taguchi-based grey relational analysis, and particle swarm optimization for PLA parts

Khaled Boulahem, Seddik Shiri, Badreddine Larbi, Mohamed Toumi Nasri et Ated Ben Khalifa

Matériaux & Techniques, 114 2 (2026) 204

Publié en ligne : 13 mars 2026

Articles les plus lus

426	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Accès gratuit Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson et Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Publié en ligne : 24 février 2022
410	Materials and Society: transitions in society, materials and energy Accès gratuit How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Publié en ligne : 26 avril 2021
142	Materials and Society: transitions in society, materials and energy Open Access The beginning and the end of the aluminium value chain Leiv Kolbeinsen Matériaux & Techniques, 108 5-6 (2020) 506 Publié en ligne : 26 avril 2021
110	Special Issue on ‘Glass in our daily life’, edited by Xavier Capilla, Frédéric Angeli and Daniel R. Neuville Open Access Review Méthodes d’analyse des verres Charles Le Losq, Mariona Tarrago, Wilfried Blanc, Peggy Georges, Louis Hennet, Didier Zanghi, Gérald Lelong, Salomé Pannefieu et Daniel R. Neuville Matériaux & Techniques, 110 4 (2022) 403 Publié en ligne : 5 octobre 2022
99	Special Issue on ‘The role of Hydrogen in the transition to a sustainable steelmaking process’; edited by Ismael Matino and Valentina Colla Accès gratuit Review Net-Zero transition in the steel sector: beyond the simple emphasis on hydrogen, did we miss anything? Jean-Pierre Birat Matériaux & Techniques, 111 2 (2023) 201 Publié en ligne : 14 juin 2023

Volume 114 / Numéro 3 (2026) (en cours)
Voir le sommaire
Volume 114 / Numéro 2 (2026)
Légende : High-precision fabrication of a lattice cube, showcasing advanced materials processing and smart manufacturing
Voir le sommaire
Volume 114 / Numéro 1 (2026)
Légende : SEM-EDS mapping of carbothermically reduced rotary kiln slag (© Gianluca Dall'Osto, Carlo Mapelli and Davide Mombelli - Dipartimento di Meccanica, Politecnico di Milano)
Voir le sommaire
Volume 113 / Numéro 5-6 (2025)
High-precision fabrication of a lattice cube, showcasing advanced materials processing and smart manufacturing
Voir le sommaire
Volume 113 / Numéro 4 (2025)
Légende : Photo © Andrew McLeish.
Voir le sommaire

Articles récents (publié au cours des 5 dernières années)

21	Special Issue on ‘Materials and Society: the circular economy, design for circularity and industrial symbiosis’, edited by Jean-Pierre Birat, Gaël Fick, Nicolas Perry, Andrea Declich, Leiv Kolbensein, Dominique Millet and Thecle Alix Open Access Influence of design properties of printed electronics on their environmental profile Tobias M. Prenzel, Florian Gehring, Franziska Fuhs et Stefan Albrecht Matériaux & Techniques, 109 5-6 (2021) 506 Publié en ligne : 10 mai 2022
21	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Accès gratuit Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson et Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Publié en ligne : 24 février 2022
21	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Open Access Hydrogen steelmaking. Part 1: Physical chemistry and process metallurgy Fabrice Patisson, Olivier Mirgaux et Jean-Pierre Birat Matériaux & Techniques, 109 3-4 (2021) 303 Publié en ligne : 3 février 2022
15	Review A review on the influence of natural-synthetic fibre hybrid reinforced polymer composites for bulletproof and ballistic applications Dennis O. Bichang’a, Oladunni O. Alabi, Isiaka O. Oladele, Fatai O. Aramide, Adeolu A. Adediran et Patricia A.I. Popoola Matériaux & Techniques, 110 5 (2022) 503 Publié en ligne : 5 octobre 2022
14	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Open Access Decarbonization of the steel industry. A techno-economic analysis Amaia Sasiain Conde, Katharina Rechberger, Andreas Spanlang, Hermann Wolfmeir et Christopher Harris Matériaux & Techniques, 109 3-4 (2021) 305 Publié en ligne : 18 février 2022

Facteur d'impact 2024 : 1,1
Facteur d'impact à 5 ans 2024 : 0,9

*Journal Citation Reports™ from Clarivate, 2025

Inscrivez-vous aux alertes courriels

Éditeur en chef : Jean-Pierre Birat
Rédacteur en chef adjoint : Xavier Colin

ISSN : 0032-6895 - eISSN : 1778-3771

Actualités

Plus d'actualités

Nouveaux livres

Accédez à notre sélection de livres

3829	Materials and Society: transitions in society, materials and energy Accès gratuit How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Publié en ligne : 26 avril 2021
3252	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Accès gratuit Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson et Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Publié en ligne : 24 février 2022
2074	Special Issue on ‘Circular Economy initiatives and solutions in the steel sector’, edited by Valentina Colla and Ismael Matino Open Access Review Roadmap for recycling practices and resource utilization in the iron and steelmaking industry: a case studies Lina Kieush, Johannes Rieger, Rosella Attrotto, Angelo Sorino, Wim van der Stricht, Harmen Oterdoom, Eetu Pekka Heikkinen, Gianluca Dall’Osto, Carlo Mapelli, Davide Mombelli et al. (15 de plus) Matériaux & Techniques, 112 5 (2024) 503 Publié en ligne : 21 novembre 2024
1808	Special Issue on ‘Glass in our daily life’, edited by Xavier Capilla, Frédéric Angeli and Daniel R. Neuville Open Access Review Méthodes d’analyse des verres Charles Le Losq, Mariona Tarrago, Wilfried Blanc, Peggy Georges, Louis Hennet, Didier Zanghi, Gérald Lelong, Salomé Pannefieu et Daniel R. Neuville Matériaux & Techniques, 110 4 (2022) 403 Publié en ligne : 5 octobre 2022
1302	Materials and Society: transitions in society, materials and energy Open Access The beginning and the end of the aluminium value chain Leiv Kolbeinsen Matériaux & Techniques, 108 5-6 (2020) 506 Publié en ligne : 26 avril 2021

1541	Special Issue on ‘Overview, state of the art, recent developments and future trends regarding Hydrogen route for a green steel making process’, edited by Ismael Matino and Valentina Colla Accès gratuit Hydrogen steelmaking, part 2: competition with other net-zero steelmaking solutions – geopolitical issues Jean-Pierre Birat, Fabrice Patisson et Olivier Mirgaux Matériaux & Techniques, 109 3-4 (2021) 307 Publié en ligne : 24 février 2022
1366	Materials and Society: transitions in society, materials and energy Accès gratuit How to tell the story of change and transition of the energy, ecological and societal systems Jean-Pierre Birat Matériaux & Techniques, 108 5-6 (2020) 502 Publié en ligne : 26 avril 2021
525	Special Issue on ‘The role of Hydrogen in the transition to a sustainable steelmaking process’; edited by Ismael Matino and Valentina Colla Accès gratuit Review Net-Zero transition in the steel sector: beyond the simple emphasis on hydrogen, did we miss anything? Jean-Pierre Birat Matériaux & Techniques, 111 2 (2023) 201 Publié en ligne : 14 juin 2023
503	Special Issue on ‘Advances in Steel Technologies’, edited by Carlo Mapelli, Silvia Barella and Riccardo Carli Open Access Advancing hydrogen plasma smelting reduction: Experimental insights from a pilot plant Bernhard Adami, Manuel A. Farkas, Johannes Schenk et Michael A. Zarl Matériaux & Techniques, 114 1 (2026) 105 Publié en ligne : 11 mars 2026
497	Materials and Society: transitions in society, materials and energy Open Access The beginning and the end of the aluminium value chain Leiv Kolbeinsen Matériaux & Techniques, 108 5-6 (2020) 506 Publié en ligne : 26 avril 2021