EDP Sciences logo
Authentification abonné
Rechercher
Menu
Accueil Tous les numéros Volume 107 / Numéro 1 (2019) Matériaux & Techniques, 107 1 (2019) 103 Références
Numéro
Matériaux & Techniques
Volume 107, Numéro 1, 2019
Society and Materials (SAM12)
Numéro d'article 103
Nombre de pages 8
DOI https://doi.org/10.1051/mattech/2018057
Publié en ligne 21 mars 2019
  1. United Nations Environmental Programme, International Resource Panel (UNEP IRP), 2011. Decoupling natural resource use and environmental impacts from economic growth, available at http://www.resourcepanel.org/reports/decoupling-natural-resource-use-and-environmental-impacts-economic-growth (last consulted on: 2018/28/03) [Google Scholar]
  2. E. Achterberg, J. Hinfelaar, N. Bocken, Master circular business with the value hill, 2016, available at https://www.circle-economy.com/wp-content/uploads/2016/09/finance-white-paper-20160923.pdf (last consulted on 2018/08/03) [Google Scholar]
  3. Ellen MacArthur Foundation, Towards the circular economy Vol. 1: an economic and business rationale for an accelerated transitione, Tech. Rep. 2012, available at https://www.ellenmacarthurfoundation.org/assets/downloads/publications/Ellen-MacArthur-Foundation-Towards-the-Circular-Economy-vol.1.pdf (last consulted on 2018/08/03) [Google Scholar]
  4. N. Nasr, Reman for success, Ind. Eng. 42, 26 (2010) [Google Scholar]
  5. N. Nasr, M. Thurston, Remanufacturing: a key enabler to sustainable product systems, Proc. of 13th CIRP International Conference on Life-Cycle Engineering, 2006, pp. 15–18 [Google Scholar]
  6. United States International Trade Commission, Remanufactured goods: an overview of the U.S. and global industries, markets, and trade, USITC Publication 4356, Washington, 2012, pp. XVII–XVIII [Google Scholar]
  7. M. Matsumoto, S. Yang, K. Martinsen, Y. Kainuma, Trends and research challenges in remanufacturing, Int. J. Precis. Eng. Manuf.-Green Technol. 3, 129 (2016) [Google Scholar]
  8. M. Ilgin, S. Gupta, Environmentally conscious manufacturing and product recovery (ECMPRO): a review of the state of the art, J. Environ. Manag. 91, 563 (2010) [CrossRef] [Google Scholar]
  9. L. Toktay, L. Wein, S. Zenios, Inventory management of remanufacturable products, Manag. Sci. 46, 1412 (2000) [CrossRef] [Google Scholar]
  10. M. Matsumoto, S. Komatsu, Demand forecasting for production planning in remanufacturing, Int. J. Adv. Manuf. Technol. 79, 161 (2015) [CrossRef] [Google Scholar]
  11. C.C. Holt, Forecasting trends and seasonal by exponentially weighted averages. Office of Naval Research Memorandum 1957, 52, Reprinted in: Holt C.C. Forecasting seasonals and trends by exponentially weighted moving averages, Int. J. Forecast. 20, 5 (2004) [CrossRef] [Google Scholar]
  12. M. Hayakawa, T. Hara, S. Matsuoka, K. Tsuzaki, Microstructural observation of tempered martensite in a medium-carbon low-alloy steel by atomic force microscopy, J. Jpn. Inst. Met. 64, 460 (2000) [CrossRef] [Google Scholar]
  13. M. Hayakawa, S. Matsuoka, K. Tsuzaki, Observations of prior austenite grain boundaries and carbides in the same area of tempered martensite in medium-carbon steel by atomic force microscopy, J. Jpn. Inst. Met. 65, 741 (2001) [CrossRef] [Google Scholar]
  14. N. Birks, G.H. Meier, F.S. Petit. Introduction of the high-temperature oxidation of metals, Cambridge University Press, 2006 [CrossRef] [Google Scholar]
  15. D.C. Tue, T-K. Tsao, H. Murakami, L.T.H. Lien, Microstructure and oxidation behavior of Pt and Pt-Ir diffusion coatings on Ni-base single crystal superalloy, Mater. Trans. 2018, submitted. [Google Scholar]
  16. K. Nakajima, I. Daigo, K. Nansai, K. Matsubae, W. Takayanagi, M. Tomita, Y. Matsuno. Global distribution of material consumption: nickel, copper, and iron, Resour. Conserv. Recycl. 133, 369 (2018a) [CrossRef] [Google Scholar]
  17. K. Nakajima, I. Daigo, K. Nansai, K. Matsubae, W. Takayanagi, M. Tomita, Y. Matsuno, Global distribution of material stocks: iron, copper, and nickel, Matériaux & Techniques 105, 511 (2017) [CrossRef] [EDP Sciences] [Google Scholar]
  18. European Commission, 2015, Communication from the commission to the european parliament, The Council, The European economic and social committee and the committee of the regions closing the loop–An EU action plan for the Circular Economy, available at https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:52015DC0614 (last consulted on: 2018/4/10) [Google Scholar]
  19. T.E. Graedel, J. Allwood, J-P. Birat, M. Buchert, C. Hagelüken, B.K. Reck, S.F. Sibley, G. Sonnemann, What do we know about metal recycling rates? J. Ind. Ecol. 15, 355 (2011) [CrossRef] [Google Scholar]
  20. European Commission, 2017, Promoting remanufacturing, refurbishment, repair, and direct reuse, available at http://ec.europa.eu/environment/international_issues/pdf/7_8_february_2017/workshop_report_Brussels_7_8_02_2017.pdf (last consulted on: 2018/4/10) [Google Scholar]
  21. Japan auto parts industries association (JAPIA), Survey of auto parts shipment, 2016, available at http://www.japia.or.jp/research/foword.html (last consulted on: 2018/28/03) [Google Scholar]
  22. Ministry of Economy, Trade and Industry. Market survey report 2014 (in Japanaese), available at http://www.meti.go.jp/policy/mono_info_service/mono/automobile/automobile_recycle/examination/pdf/kaitaichousa.pdf (last consulted on: 2018/4/10) [Google Scholar]
  23. BroadLeaf Co., Ltd. Parts Station Net, available at https://www.broadleaf.co.jp/products/auto/psrc/ [Google Scholar]
  24. K. Nakajima, O. Takeda, T. Miki, K. Matsubae, T. Nagasaka, Thermodynamic analysis for the controllability of elements in the recycling process of metals, Environ. Sci. Technol. 45, 4929 (2011) [CrossRef] [PubMed] [Google Scholar]
  25. S. Nakamura, Y. Kondo, S. Kagawa, K. Matsubae, K. Nakajima, T. Nagasaka. MaTrace: tracing the fate of materials over time and across products in open-loop recycling, Environ. Sci. Technol. 48, 7207 (2014) [CrossRef] [Google Scholar]
  26. S. Nakamura, Y. Kondo, K. Nakajima, H. Ohno, S. Pauliuk, Quantifying recycling and losses of Cr and Ni in steel throughout multiple life cycles using Ma-Trace-Alloy, Environ. Sci. Technol. 51, 9469 (2017) [CrossRef] [Google Scholar]
  27. Z. Zhang, K. Takeyama, H. Ohno, K. Matsubae, K. Nakajima, T. Nagasaka, An estimation of the amount of dissipated alloy elements in special steel from automobile recycling process. 12th International Conference on Society & Materials, 2018 [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.