Numéro |
Matériaux & Techniques
Volume 85, Numéro 1-2, 1997
|
|
---|---|---|
Page(s) | 39 - 42 | |
DOI | https://doi.org/10.1051/mattech/199785010039 | |
Publié en ligne | 13 avril 2017 |
Caractérisation de surface de composites de type BMC
Surface characterization of bulk moulded compounds (BMC)
1 Institut de Chimie des Surfaces et Interfaces (UPR 9069), Mulhouse
2 PSA Etudes et Recherches, Centre Technique de Belchamp, Voujeaucourt
Abstract
The car manufacturing industry tends to replace steel panels by composite materials such as unsaturated polyester matrices reinforced by glass fibers and filled with calcium carbonate. Sheet moulded compounds -SMC- and bulk moulded compounds -BMC- are the two possible types of such composites. Here, we are interested in the knowledge of the surface characteristics of BMC composites in order to predict their behavior in adhesive joints. Different complementary techniques of the surface analysis (SEM, ESCA, TOF-SIMS, SDL and wettability) allowed us to reach the goal. We were particularly interested in the influence of the concentration and the nature of the internal mould release agents (zinc or calcium stearate) introduced in the compounds on the surface properties of the composites.
© SIRPE 1997
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.