Numéro |
Matériaux & Techniques
Volume 83, Numéro 1-2, 1995
|
|
---|---|---|
Page(s) | 39 - 44 | |
DOI | https://doi.org/10.1051/mattech/199583010039 | |
Publié en ligne | 13 avril 2017 |
Analyse du fonctionnement autolubrifiant de coussinets en bronze poreux imbibés d’huile
Analysis of the autolubricating action of porous bronze bearings saturated with oil
Service d’Eléments de Machines et Tribologie, Université de Liège, Belgique
Abstract
This paper aims to characterize porous bronze bearings containing oil, working with no additional feeding. Experimental results are presented and compared to a classical hydrodynamic model, which is moreover criticized. We observe that the friction coefficient decreases during the lapping process and when the viscosity of the lubricant goes down. The combining of both effects is obtained by using a coating of white metal and a low viscosity lubricant. We then measure a friction coefficient of about 0.003, ten times smaller than usually observed, for very small values of the Sommerfeld number.
© SIRPE 1995
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.