Mise en oeuvre des matériaux / Materials processing

Dry turning optimization of austenitic stainless steel 316L based on Taguchi and TOPSIS approaches 401

Youssef Touggui, Salim Belhadi, Tarek Mabrouki, Mustapha Temmar and Mohamed Athmane Yallese

Published online: 21 December 2020

DOI: https://doi.org/10.1051/mattech/2020034

• Abstract
• Full HTML
• PDF (948.6 KB)
• References

Métaux et alliages / Metals and alloys

Dry machining of Inconel 718 super alloys using uncoated tool: Experimental and numerical analysis 402

Merugu Rakesh and Saurav Datta

Published online: 21 December 2020

DOI: https://doi.org/10.1051/mattech/2020035

• Abstract
• Full HTML
• PDF (3.833 MB)
• References

Traitements des matériaux / Materials treatment

Experimental analysis of the correlation between ultrasonic velocity and metallographic and cutting performance parameters of boron carbide-doped diamond sockets 403

Gokhan Ekincioglu, Timucin Emre Tabaru, Sekip Esat Hayber and Rasit Altindag

Published online: 21 December 2020

DOI: https://doi.org/10.1051/mattech/2020033

• Abstract
• Full HTML
• PDF (1.662 MB)
• References

Matériaux pour l’énergie / Materials for Energy

Influence de la pression de compactage sur les caractéristiques physiques et la durée de combustion de combustible à base de sciure de bois et de liant végétal 404

Ovo Sandrine Flora Augou, Souleymane Ouattara, Conand Honoré Kouakou, Koffi Clément Kouadio, Aka Alexandre Assande and Edjikémé Emeruwa

Published online: 24 March 2021

DOI: https://doi.org/10.1051/mattech/2021001

• Abstract
• Full HTML
• PDF (771.7 KB)
• References

Sélection des matériaux et des procédés / Materials and processes selection

Experimental investigation and fuzzy logic approach for evaluation of magnesium recovery in the reparation of Al-Mg alloys using modified stir casting method 405

Rajesh Kumar Behera, Birajendu Prasad Samal, Sarat Chandra Panigrahi and Sanjay Kumar Behera

Published online: 30 March 2021

DOI: https://doi.org/10.1051/mattech/2021002

• Abstract
• Full HTML
• PDF (800.7 KB)
• References

Comportement en service / Behaviour in service

Étude statistique de la variation de résistances à la compression du béton 406

Abdelhafid Boukellouda, Toufik Kheffache and Nasser Chelouah

Published online: 30 March 2021

DOI: https://doi.org/10.1051/mattech/2021011

• Abstract
• Full HTML
• PDF (936.5 KB)
• References