| Issue |
Matériaux & Techniques
Volume 79, Number 12, 1991
|
|
|---|---|---|
| Page(s) | 27 - 31 | |
| DOI | https://doi.org/10.1051/mattech/199179120027 | |
| Published online | 13 April 2017 | |
Analyse élastohydrodynamique appliquée au frottement des céramiques dans l’eau
Elastohydrodynamic analysis of ceramic materials in water
1 Chercheur. Laboratoire de Mécanique des Solides. Unité associée C.N.R.S. Poitiers
2 Professeur et Directeur du Laboratoire de Mécanique des Solides de Poitiers, Unité associée C.N.R.S.
Abstract
An elastohydrodynamic study is performed for the ceramic contact in water, the results are given for the sintered silicone carbide (SSiC).
This particular material has been choosen because of its good properties of inoxydability and its possibility to crate a film between the surfaces.
This analysis is based upon the work of S.M. Rhode. It deals with the calculation of the pressure distribution, the film thickness between the two matting surfaces, the friction coefficient and the deformation of the contact surfaces.
The numerical modelisation was applied to the configuration of a SSiC shaft/bearing immersed in water. Pressure, film thickness, elastic displacement and friction coefficient are given. The film thickness is very small: about few tenths micrometer, and the deformations of the surface elements are 10 times smaller, due to the good conformity of the surfaces.
© SIRPE 1991
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.