| Issue |
Matériaux & Techniques
Volume 73, Number 12, 1985
|
|
|---|---|---|
| Page(s) | 693 - 697 | |
| DOI | https://doi.org/10.1051/mattech/198573120693 | |
| Published online | 19 April 2017 | |
Étude d'une méthode d'encapsulation de l'aluminium liquide en vue de la réalisation d'éléments de stockage par chaleur latente
Container for liquid aluminium
1 Laboratoire d'Energétique Solaire et Laboratoire des Ultra Réfractaires, CNRS
2 Département Matériaux, Ecole Nationale Supérieure d’Arts et Métiers
Abstract
In order to design a latent heat storage tank using aluminium, a container for liquid metal is described. The wall must be resistant to liquid aluminium corrosion, good heat conductor and resistant to particles abrasion because we use fluidized bed as heat transfer medium. Consequently the container is composed of a graphite tube puts inside a Steel tube, the heat transfer between the two elements is realized by liquid lead. The resistance of this System to corrosion and cycling between 800°C and 350°C is presented.
© SIRPE 1985
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.