Volume 114 / No 3 (2026)

Matériaux & Techniques articles are available online as soon as the production process is complete.
The currently opened issue will be updated regularly until it is complete. To keep abreast of new articles, you may either visit this page regularly or subscribe to our E-mail alert

Matériaux & Techniques

Volume 114 / No 3 (2026) (in progress)

Export the citation of the selected articles Export
Select all

Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Deep learning approach for predicting hoop-direction mechanical behavior of tubular materials in hydroforming 301

Zied Ktari and Ali Khalfallah

Published online: 20 March 2026

DOI: https://doi.org/10.1051/mattech/2026006

Electrophoretic deposition of hydroxyapatite coating on Ti6Al4V alloy: impact of chitosan on adhesion properties and microstructure 302

Jassem Kammoun, Hafedh Dhiflaoui and Naoufel Ben Moussa

Published online: 24 March 2026

DOI: https://doi.org/10.1051/mattech/2026004

Enhancing structural and thermal properties of low-density polyethylene waste using dolomite and calcite mineral fillers 303

Sameh Attia-Essaies, Asma Nouira, Mehdi Ismail, Najoua Barhoumi, Aymen Ben Ahmed and Ezzedine Srasra

Published online: 25 March 2026

DOI: https://doi.org/10.1051/mattech/2026010

Effect of 3D printing parameters on the thermomechanical behavior of TPU 90A 304

Hanen Boubakri, Naoufel Ben Moussa, Houda Yahyaoui and Mohamed Habibi

Published online: 24 March 2026

DOI: https://doi.org/10.1051/mattech/2026005

Analysis of cutting parameters for trimming carbon, glass and hybrid fiber reinforced polymer laminates using vibration monitoring and surface roughness assessment 305

Ezzeddine Ftoutou, Mihed Ben Said, Imed Hajjaji, Sirine Stambouli, Moez Trigui and Ated Ben Khalifa

Published online: 24 March 2026

DOI: https://doi.org/10.1051/mattech/2026008

Special Issue on ‘Opportunities and Challenges of Hydrogen Use for Steelmaking Decarbonization’, edited by Ismael Matino, Valentina Colla and Akhilesh Swarnakar

Open Access

Hydrogen plasma smelting reduction of Cr₂O₃/Chromite: challenges, insights, and initial results of direct and sustainable stainless-steel production 306

Mohammad Jafarzadeh, Mert Saraçoğlu, Michael A. Zarl, Daniel Ernst and Susanne K. Michelic

Published online: 24 March 2026

DOI: https://doi.org/10.1051/mattech/2026003

Matériaux & Techniques

Volume 114 / No 3 (2026) (in progress)

Special Issue on ‘Innovative Materials and Processes for Industrial and Biomedical Applications’, edited by Naoufel Ben Moussa, Mohamed Ali Terres, Sami Chatti, Farhat Ghanem and Guénaël Germain

Deep learning approach for predicting hoop-direction mechanical behavior of tubular materials in hydroforming 301

Electrophoretic deposition of hydroxyapatite coating on Ti6Al4V alloy: impact of chitosan on adhesion properties and microstructure 302

Enhancing structural and thermal properties of low-density polyethylene waste using dolomite and calcite mineral fillers 303

Effect of 3D printing parameters on the thermomechanical behavior of TPU 90A 304

Analysis of cutting parameters for trimming carbon, glass and hybrid fiber reinforced polymer laminates using vibration monitoring and surface roughness assessment 305

Special Issue on ‘Opportunities and Challenges of Hydrogen Use for Steelmaking Decarbonization’, edited by Ismael Matino, Valentina Colla and Akhilesh Swarnakar

Hydrogen plasma smelting reduction of Cr2O3/Chromite: challenges, insights, and initial results of direct and sustainable stainless-steel production 306

Hydrogen plasma smelting reduction of Cr₂O₃/Chromite: challenges, insights, and initial results of direct and sustainable stainless-steel production 306