Subscriber Authentication Point

EDPS Account

Home

Volume 112 / No 3 (2024)

Technique de découpage laser
Laser cutting technique

Matériaux & Techniques

Volume 112 / No 3 (2024)

Technique de découpage laser
Laser cutting technique

Export the citation of the selected articles Export
Select all

Special Issue on ‘Non-Conventional Machining Processes’, edited by Sami Chatti, Naoufel Ben Moussa, Yessine Ayed, Farhat Ghanem, Guénaël Germain and Wacef Ben Salem

Free Access

Editorial

Editorial E1

Sami Chatti, Naoufel Ben Moussa, Yessine Ayed, Farhat Ghanem, Guénaël Germain and Wacef Ben Salem

Published online: 08 May 2024

DOI: https://doi.org/10.1051/mattech/2024013

Numerical modeling of cutting force and chip formation during water Jet Assisted Machining of Ti17 based on SPH/FEM method 301

Ikram Ben Belgacem, Lotfi Cheikh, Haithem Khochtali, El Manaa Barhoumi and Wacef Ben Salem

Published online: 08 May 2024

DOI: https://doi.org/10.1051/mattech/2024008

Numerical modeling of phase transformations of Ti6Al4V during electrical discharge machining 302

Ons Marzougui, Naoufel Ben Moussa and Farhat Ghanem

Published online: 08 May 2024

DOI: https://doi.org/10.1051/mattech/2023047

Experimental investigation of tool feed rate and machining strategy on surface roughness in flat end milling of Nickel-Iron alloy Supra50 303

Ezzeddine Ftoutou, Mihed Ben Said, Ahmed Seifallah Frih, Ated Ben Khalifa and Moez Trigui

Published online: 08 May 2024

DOI: https://doi.org/10.1051/mattech/2023040

Artificial neural network-based modelling and prediction of white layer formation during hard turning of steels 304

Abdallah Souid, Walid Jomaa and Mohamed Ali Terres

Published online: 08 May 2024

DOI: https://doi.org/10.1051/mattech/2024001

A multiphysics model to predict the surface integrity of EDM machined parts 305

Adnene Tlili and Farhat Ghanem

Published online: 14 May 2024

DOI: https://doi.org/10.1051/mattech/2023046

Impact of smoothing interpolations on the non-conventional machining of pockets 306

El Bechir Msaddek, Zoubeir Bouaziz and Maher Baili

Published online: 20 May 2024

DOI: https://doi.org/10.1051/mattech/2023039

Development of a numerical cutting model for understanding the chip formation in cryogenic machining 307

Haithem Khochtali, Ikram Ben Belgacem, Farhat Zemzemi and Wacef Ben Salem

Published online: 04 June 2024

DOI: https://doi.org/10.1051/mattech/2023037