Matériaux & Techniques

Approche quantitative de la fatigue d’un alliage d’aluminium de moulage : AlSi7G0,3 p. 5

Stéphane Savelli, Jean-Yves Buffière and Roger Fougères

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050005

• Abstract
• PDF (1.597 MB)

Hot deformation microstructures of Al-1 %Mn single crystals p. 11

J-Ch. Glez, F. Perocheau and J. H. Driver

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050011

• Abstract
• PDF (987.6 KB)

Élaboration et optimisation de nanoprécipités d’Ain dans une matrice d’aluminium p. 15

E. Leblond, D. Tréheux, C. Esnouf, G. Fantozzi, N. Moncoffre, G. Marest and Y. Corre

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050015

• Abstract
• PDF (875.2 KB)

Hot tearing phenomena in Al-Cu alloys : grain refinement effect p. 19

M. Braccini, C.L. Martin, M. Suéry and Y. Bréchet

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050019

• Abstract
• PDF (1.514 MB)

Anomalie du comportement plastique d’un alliage intermétallique ordonné B2 : FeAl. Rôle du bore p. 25

Olivier Calonne, Anna Fraczkiewicz and François Louchet

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050025

• Abstract
• PDF (1.145 MB)

The process of equal channel angular extrusion - Application to grain refinement p. 29

L. Dupuy, E.F. Rauch and J.J. Blandin

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050029

• Abstract
• PDF (1.332 MB)

Superplasticity of an Al-Mg alloy : deformation mechanisms and damage behaviour p. 35

Chantal Martin, Jean-Jacques Blandin and Luc Salvo

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050035

• Abstract
• PDF (1.586 MB)

Fragilité intergranulaire de l’acier 17-4PH p. 41

F. Christien, R. Le Gall, G. Saindrenan and J.-M. Boursier

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050041

• Abstract
• PDF (969.0 KB)

Étude de la cinétique de précipitation des nitrures d’aluminium dans un acier bas carbone p. 45

V. Guetaz, J. Merlin, V. Massardier and M. Soler

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050045

• Abstract
• PDF (1.581 MB)

TEM, EDX and EELS investigation of aluminium nitride precipitation in low-carbon steels p. 51

M. Sennour and C. Esnouf

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050051

• Abstract
• PDF (1.609 MB)

Influence of strain-induced martensitic transformation on fatigue short crack behaviour in an austenitic stainless steel p. 57

Natacha Baffie, Jacques Stolarz and Thierry Magnin

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050057

• Abstract
• PDF (1.985 MB)

Dynamic recrystallization and grain refinement in a high purity 304L type austenitic stainless steel p. 65

L. Gavard and F. Montheillet

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050065

• Abstract
• PDF (957.4 KB)

Improvement of stress corrosion cracking (SCC) resistance by cyclic pre-straining of 316 L austenitic stainless steel in an aqueous boiling MgCl₂ solution p. 69

Ian de Curiere, Bernard Bayle and Thierry Magnin

Published online: 11 April 2017

DOI: https://doi.org/10.1051/mattech/200088050069

• Abstract
• PDF (1008 KB)