| Issue |
Matériaux & Techniques
Volume 83, Number 12, 1995
|
|
|---|---|---|
| Page(s) | 19 - 22 | |
| DOI | https://doi.org/10.1051/mattech/199583120019 | |
| Published online | 13 April 2017 | |
Remouillage par pulvérisation d’eau d’une surface métallique chaude
Maîtrise des paramètres contrôlant les régimes mouillant et non mouillant
Rewetting of a hot metallic surface by water spraying
1 École des Mines de Nancy, Laboratoire de Science et Génie des Matériaux Métalliques, Thésard, BDI CNRS ;
2 Ecole des Mines de Nancy, Laboratoire de Science et Génie des Matériaux Métalliques, Directeur de Recherche CNRS ;
3 Ecole des Mines de Nancy, Laboratoire de Science et Génie des Matériaux Métalliques, Chargé de Recherche CNRS
Abstract
A water spraying system is used for cooling 50 mm diameter nickel samples. Surface flows of fluids are evaluated with the aid of different techniques in order to characterize the homogeneity of the jet. The thermal homogeneity of the sample is measured for each cooling configuration. The wetting temperature of the heated surface is characterized versus the surface fluid flows and versus the temperature of the water. The results obtained from this study are of real interest for any industrial installation (especially in metallurgy) using water spraying.
© SIRPE 1995
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.