| Issue |
Matériaux & Techniques
Volume 77, Number 9-10, 1989
|
|
|---|---|---|
| Page(s) | 35 - 39 | |
| DOI | https://doi.org/10.1051/mattech/198977090035 | |
| Published online | 19 April 2017 | |
Modélisation du comportement plastique anisotrope des métaux CFC et CC texturés*
Modeling the anisotropic plastic behaviour of textured FCC and BCC metals
1 Directeur de Recherche au CNRS Ecole des Mines de Saint-Etienne, Département Matériaux
2 Ecole des Mines de Saint-Etienne, Département Matériaux
Abstract
Plastic anisotropy of fcc and bcc metals can be quite simply and yet accurately described by using a continuum criterion (e.g. the Hill quadratic one) if crystallographic texture is explicitly taken into account: for that purpose, the <100> directions of the ideal orientation are selected as anisotropy axes and the anisotropy constants are calculated by an optimization procedure. It is shown by this way that parameters such as the Lankford coefficient are generally Utile sensitive to the crystallographic structure as well as to the ratio £ of the critical resolved sliear stresses associated with the 110 and 112 slip planes in the bcc structure.
© SIRPE 1989
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.