| Issue |
Matériaux & Techniques
Volume 76, 1988
Performances des collages modernes
|
|
|---|---|---|
| Page(s) | 27 - 32 | |
| DOI | https://doi.org/10.1051/mattech/198876120027s | |
| Published online | 21 June 2017 | |
Adaptation d’une nouvelle éprouvette SPE* pour l’étude du délaminage en mode I. Essais, éléments finis, calcul analytique
Adaptation of a new specimen SCB** to mode I delamination study: tests, finite elements, analytical calculation
1 Docteur de l’Université de Compiègne Maître assistant à l’Ecole Nationale Polytechnique d’Alger.
2 Docteur de l’Université de Compiègne, Chercheur au CNES
3 Maître assistant à l’Université de Compiègne
4 Professeur et Conseiller scientifique chez P.S.A.
Abstract
Linear elastic fracture mechanics (LEFM) associated with a finite element calculation has been used for mode I (opening) delamination on two types of specimen, DCB (Double Cantilever Beam) and SCB (Single Cantilever Beam). The SCB was first introduced for mode I tests at high rates by Boudjemaa [1].
The results show the validity of the tests on this new SCB specimen, both by an energy approach using GIc and with respect to the strain field near crack tip.
The finite element calculation requires knowledge of critical load at crack initiation. This value can only be obtained experimentally. The calculation has allowed us to verify that the two specimen types, SCB and DCB, are energetically equivalent.
The analytical calculation has enabled the dependence of GI on the longitudinal strain to be established.
© SIRPE 1988
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.