Article cité par

La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).

Article cité :

Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic

Ranjit Kumar Behera, Sudhansu Ranjan Das

Matériaux & Techniques, 107 6 (2019) 603

Publié en ligne : 2020-03-24

DOI: https://doi.org/10.1051/mattech/2020008

Citations de cet article :

Material removal rate in AJM of zirconia ceramic using silicon carbide abrasive: Investigation, modelling, and optimization

Soumya Ranjan Samantaray, Sudhansu Ranjan Das, Debabrata Dhupal and S. Kumar Singh
E3S Web of Conferences 552 01051 (2024)
https://doi.org/10.1051/e3sconf/202455201051

COMPARATIVE PERFORMANCE EVALUATION BETWEEN AJM AND HOT-AJM DURING MACHINING OF ZIRCONIA CERAMIC USING SILICON CARBIDE ABRASIVES

SUBHADIP PRADHAN, SOUMYA RANJAN SAMANTARAY, DEBABRATA DHUPAL and SUDHANSU RANJAN DAS
Surface Review and Letters (2024)
https://doi.org/10.1142/S0218625X25500714

Machining of aluminium nitride ceramic with a hAJM process using SiC abrasives: Experiments and simulation

Subhadip Pradhan and Debabrata Dhupal
Journal of Manufacturing Processes 95 68 (2023)
https://doi.org/10.1016/j.jmapro.2023.04.011

An Accurate Model for Threshold Voltage Analysis of Dual Material Double Gate Metal Oxide Semiconductor Field Effect Transistor

Himeli Chakrabarti, Reshmi Maity, S. Baishya and N. P. Maity
Silicon 13 (6) 1851 (2021)
https://doi.org/10.1007/s12633-020-00553-8

MACHINING OF HARDSTONE QUARTZ WITH MODIFIED AJM PROCESS USING HOT SiC ABRASIVES: ANALYSIS, MODELING, OPTIMIZATION, AND COST ANALYSIS

SUBHADIP PRADHAN, SUDHANSU RANJAN DAS, BASANTA KUMAR NANDA, PANKAJ CHARAN JENA and DEBABRATA DHUPAL
Surface Review and Letters 28 (02) 2050049 (2021)
https://doi.org/10.1142/S0218625X20500493

Identification of suitable machining zone during the plasma arc cutting of SS-304

Dalvir Singh, Yogesh Shrivastava and Raj kumar
Materials Today: Proceedings 38 413 (2021)
https://doi.org/10.1016/j.matpr.2020.07.598