Dry turning optimization of austenitic stainless steel 316L based on Taguchi and TOPSIS approaches
Matériaux & Techniques, 108 4 (2020) 401
Published online: 2020-12-21
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Multi-Objective Optimization of Turning for Nickel-Based Alloys Using Taguchi-GRA and TOPSIS Approaches
P. Mastan Rao, Ch. Deva Raj, Sneha H. Dhoria, M. Vijaya and J. Ranga Raya ChowdaryJournal of The Institution of Engineers (India): Series D 105 (3) 1473 (2024)
https://doi.org/10.1007/s40033-023-00554-y
Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool
Smita Padhan, Anshuman Das and Sudhansu Ranjan DasAdvances in Materials and Processing Technologies 1 (2024)
https://doi.org/10.1080/2374068X.2024.2314808
Comparative assessment between DFA, NSGA-II coupled with TOPSIS, GRA, and TOPSIS for multiobjective optimization of gray cast iron turning process using CBN insert
Salim Chihaoui, Ikhlas Meddour, Mohamed AthmaneYallese, Salim Belhadi and Khaoula SafiProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 238 (4) 1765 (2024)
https://doi.org/10.1177/09544089231194039
Performance analysis and optimization of machining parameters using coated tungsten carbide cutting tool developed by novel S3P coating method
Sukhdev gangwar, Subhas Chandra Mondal, Ajay Kumar and Ranjan Kumar GhadaiInternational Journal on Interactive Design and Manufacturing (IJIDeM) 18 (6) 3909 (2024)
https://doi.org/10.1007/s12008-024-01852-9
Straight turning optimization of low alloy steel using MCDM methods coupled with Taguchi approach
Salah Hadjela, Salim Belhadi, Nouredine Ouelaa, Khaoula Safi and Mohamed Athmane YalleseThe International Journal of Advanced Manufacturing Technology 124 (5-6) 1607 (2023)
https://doi.org/10.1007/s00170-022-10584-7
Modeling and optimization in turning of PA66-GF30% and PA66 using multi-criteria decision-making (PSI, MABAC, and MAIRCA) methods: a comparative study
Sabrina Haoues, Mohamed Athmane Yallese, Salim Belhadi, Salim Chihaoui and Alper UysalThe International Journal of Advanced Manufacturing Technology 124 (7-8) 2401 (2023)
https://doi.org/10.1007/s00170-022-10583-8
Tool wear, 3D surface topography, and comparative analysis of GRA, MOORA, DEAR, and WASPAS optimization techniques in turning of cold work tool steel
Khaoula Safi, Mohamed Athmane Yallese, Salim Belhadi, Tarek Mabrouki and Aissa laouissiThe International Journal of Advanced Manufacturing Technology 121 (1-2) 701 (2022)
https://doi.org/10.1007/s00170-022-09326-6
Parametric study and multi-criteria optimization during turning of X210Cr12 steel using the desirability function and hybrid Taguchi-WASPAS method
Khaoula Safi, Mohamed Athmane Yallese, Salim Belhadi, Tarek Mabrouki and Salim ChihaouiProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236 (15) 8401 (2022)
https://doi.org/10.1177/09544062221086171
Optimization of surface roughness, tool wear and material removal rate in turning of Inconel 718 with ceramic composite tools using MCDM methods based on Taguchi methodology
H Boumaza, S Belhadi, M A Yallese, K Safi and A HaddadSādhanā 48 (1) (2022)
https://doi.org/10.1007/s12046-022-02060-5