EDP Sciences logo
Subscriber Authentication Point
Search
Menu
All issues Matériaux & Techniques, 106 4 (2018) 404 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Data-driven prediction of ultimate tensile strength in low alloy steel: A machine learning approach

Ali Shabani, Marieh Aminaei and Mohammad Reza Toroghinejad
Computational Materials Science 258 114045 (2025)
https://doi.org/10.1016/j.commatsci.2025.114045

Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool

Smita Padhan, Anshuman Das and Sudhansu Ranjan Das
Advances in Materials and Processing Technologies 1 (2024)
https://doi.org/10.1080/2374068X.2024.2314808

Influence of H3PO4 on SAE/AISI 4340 steel quenching

Régis Gustavo de Souza, Sandra Raquel Kunst, Isadora Schell Frozza, Juliano da Silva Alves, Luana Góes Soares, Pedro Hernandez Júnior, Luciane Taís Fuhr and Cláudia Trindade Oliveira
Matéria (Rio de Janeiro) 29 (4) (2024)
https://doi.org/10.1590/1517-7076-rmat-2024-0505

CNN-based preform design: effect of training data configuration on strain distribution in forged products

Joonhee Park, Byeongchan Han, Jaegu Choi, Sangyun Shin and Naksoo Kim
The International Journal of Advanced Manufacturing Technology 135 (9-10) 4837 (2024)
https://doi.org/10.1007/s00170-024-14768-1

Processing parameters optimization in hot forging of AISI 4340 steel using instability map and reinforcement learning

Ho Young Jeong, Joonhee Park, Yosep Kim, Sang Yun Shin and Naksoo Kim
Journal of Materials Research and Technology 23 1995 (2023)
https://doi.org/10.1016/j.jmrt.2023.01.106

Parametric optimization of dry-turning of Nickel-Chromoly steel with various cutting tool using WASPAS method

Kanchan Kumari, Swastik Pradhan, Abhishek Barua, Sagar Mohanty, Satyajit Parida, Pravanjan Behera and Satyaranjan Rath
Materials Today: Proceedings (2023)
https://doi.org/10.1016/j.matpr.2023.10.049

Multi-objective Optimization of Turning Parameters for SiC- or Al2O3-Reinforced Aluminum Matrix Composites

Yusuf Tansel Ic, Ebru Saraloğlu Güler, Büşra Sezer, Buğrahan Samed Taş and Hazel Sultan Şahin
Process Integration and Optimization for Sustainability 5 (3) 609 (2021)
https://doi.org/10.1007/s41660-021-00169-4

Identification of suitable machining zone during the plasma arc cutting of SS-304

Dalvir Singh, Yogesh Shrivastava and Raj kumar
Materials Today: Proceedings 38 413 (2021)
https://doi.org/10.1016/j.matpr.2020.07.598

An Accurate Model for Threshold Voltage Analysis of Dual Material Double Gate Metal Oxide Semiconductor Field Effect Transistor

Himeli Chakrabarti, Reshmi Maity, S. Baishya and N. P. Maity
Silicon 13 (6) 1851 (2021)
https://doi.org/10.1007/s12633-020-00553-8

The effects of cutting environment on surface roughness and tool life in milling of AISI 4340

Shalina Sheik Muhamad, Jaharah A. Ghani, Che Hassan Che Haron and Hafizal Yazid
IOP Conference Series: Materials Science and Engineering 912 (3) 032087 (2020)
https://doi.org/10.1088/1757-899X/912/3/032087

Experimental investigation on the CO2 laser cutting of soda-lime glass

SeungGu Kang and Joonghan Shin
Journal of Mechanical Science and Technology 34 (8) 3345 (2020)
https://doi.org/10.1007/s12206-020-0727-x

Wear mechanism of a coated carbide tool in cryogenic machining of AISI 4340

Shalina Sheik Muhamad, Jaharah A. Ghani, Che Hassan Che Haron and Hafizal Yazid
Industrial Lubrication and Tribology 72 (4) 509 (2019)
https://doi.org/10.1108/ILT-07-2019-0291