Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Variation of mechanical properties of high RRR and reactor grade niobium with heat treatments

G. R. Myneni, H. Umezawa

Matériaux & Techniques, 91 7-8-9 (2003) 19-22

Published online: 2017-04-11

DOI: https://doi.org/10.1051/mattech/200391070019

PDF (1.01 MB)

This article has been cited by the following article(s):

Mechanical Design of the VSR Cavity: An Elliptical 4-Cell 1.5 GHz SRF Cavity With Strong Waveguide HOM Damping for High-Current Accelerators

N. Wunderer, S. Fendinger, H.-W. Glock, F. Glöckner, J. Knobloch, E. Sharples-Milne, S. Scherer, A. Tsakanian and A. Velez
IEEE Transactions on Applied Superconductivity 35 (4) 1 (2025)
https://doi.org/10.1109/TASC.2025.3557846

Strength Evaluation of Large Grain Niobium Sheets and Derivation of Allowable Stress

Hiroaki UMEZAWA, Masashi YAMANAKA and Naoshi NISHIDA
TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan) 60 (5) 211 (2025)
https://doi.org/10.2221/jcsj.60.211

Design Optimization of a Mechanically Improved 499.8-MHz Single-Cell Superconducting Cavity for HEPS

Hongjuan Zheng, Pei Zhang, Zhongquan Li, et al.
IEEE Transactions on Applied Superconductivity 31 (2) 1 (2021)
https://doi.org/10.1109/TASC.2020.3045746

Design and Mechanical Performance of a Dressed 166.6 MHz $\beta$=1 Proof-of-Principle Superconducting Cavity in Horizontal Tests

Xinying Zhang, Pei Zhang, Zhongquan Li, et al.
IEEE Transactions on Applied Superconductivity 30 (8) 1 (2020)
https://doi.org/10.1109/TASC.2020.2999541

RRR measurements and tensile tests of high purity large grain ingot niobium

Z Zhao, C Owen, G G R Abdo, et al.
IOP Conference Series: Materials Science and Engineering 756 (1) 012002 (2020)
https://doi.org/10.1088/1757-899X/756/1/012002

Electron beam welding of difficult-to-weld austenitic stainless steel/Nb-based alloy dissimilar joints without interlayer

Ali Hajitabar and Homam Naffakh-Moosavy
Vacuum 146 170 (2017)
https://doi.org/10.1016/j.vacuum.2017.09.046

Positron Annihilation Studies of the Near-Surface Regions of Niobium before and after Wear Treatment

J. Dryzek and P. Horodek
Tribology Letters 65 (4) (2017)
https://doi.org/10.1007/s11249-017-0902-0

Mechanical properties of niobium radio-frequency cavities

G. Ciovati, P. Dhakal, J. Matalevich, G. Myneni, A. Schmidt, J. Iversen, A. Matheisen and W. Singer
Materials Science and Engineering: A 642 117 (2015)
https://doi.org/10.1016/j.msea.2015.06.095

Dissimilar pulsed Nd:YAG laser welding of pure niobium to Ti–6Al–4V

M.J. Torkamany, F. Malek Ghaini and R. Poursalehi
Materials & Design 53 915 (2014)
https://doi.org/10.1016/j.matdes.2013.07.094

Superconducting Radio-Frequency Technology R&D for Future Accelerator Applications

Charles E. Reece and Gianluigi Ciovati
Reviews of Accelerator Science and Technology 05 285 (2012)
https://doi.org/10.1142/S1793626812300113