Performance evaluation on hardened steel - PCBN tool pair in high speed turning
Matériaux & Techniques, 91 1-2 (2003) 23-44
Published online: 2017-04-11
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Performance of coated and uncoated mixed ceramic tools in hard turning process
Hamza Bensouilah, Hamdi Aouici, Ikhlas Meddour, et al.Measurement 82 1 (2016)
https://doi.org/10.1016/j.measurement.2015.11.042
EXPERIMENTAL INVESTIGATION AND PERFORMANCE ANALYSES OF CBN INSERT IN HARD TURNING OF COLD WORK TOOL STEEL (D3)
H. Bouchelaghem, M. A. Yallese, T. Mabrouki, A. Amirat and J. F. RigalMachining Science and Technology 14 (4) 471 (2010)
https://doi.org/10.1080/10910344.2010.533621
Characteristics of Rb40 steel superficial layer under ball and roller burnishing
H. Hamadache, L. Laouar, N.E. Zeghib and K. ChaouiJournal of Materials Processing Technology 180 (1-3) 130 (2006)
https://doi.org/10.1016/j.jmatprotec.2006.05.013
The effects of cutting conditions on mixed ceramic and cubic boron nitride tool wear and on surface roughness during machining of X200Cr12 steel (60 HRC)
M A Yallese, J-F Rigal, K Chaoui and L BoulanouarProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 219 (1) 35 (2005)
https://doi.org/10.1243/095440505X8082
Usinage de l'acier 100Cr6 trempé par un outil en nitrure de bore cubique
Mohamed Athmane Yallese, Lakhdar Boulanouar and Kamel ChaouiMécanique & Industries 5 (4) 355 (2004)
https://doi.org/10.1051/meca:2004036