Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

La transformation des alliages de titane : - Etat actuel et perspectives

Y. Combres, B. Champin

Matériaux & Techniques, 79 5-6 (1991) 31-42

Published online: 2017-04-13

DOI: https://doi.org/10.1051/mattech/199179050031

PDF (3.51 MB)

This article has been cited by the following article(s):

Flow Behavior Analysis and Flow Stress Modeling of Ti17 Alloy in $${\varvec{\beta}}$$ Forging Process

Cuiyuan Lu, Jin Wang and Peize Zhang
Journal of Materials Engineering and Performance 30 (10) 7668 (2021)
https://doi.org/10.1007/s11665-021-05910-1

Identification of the optimal (α+β) forging process parameters of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si based on processing-maps

K.L. Wang, S.Q. Lu, M.W. Fu, X. Li and X.J. Dong
Materials Science and Engineering: A 527 (27-28) 7279 (2010)
https://doi.org/10.1016/j.msea.2010.08.031

Optimization of β/near-β forging process parameters of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si by using processing maps

Kelu Wang, Shiqiang Lu, M.W. Fu, Xin Li and Xiangjuan Dong
Materials Characterization 60 (6) 492 (2009)
https://doi.org/10.1016/j.matchar.2008.12.007

Flow stress prediction during hot working of near-α titanium alloys

P. Vo, M. Jahazi, S. Yue and P. Bocher
Materials Science and Engineering: A 447 (1-2) 99 (2007)
https://doi.org/10.1016/j.msea.2006.10.032

Influence of thermomechanical processing on microstructural evolution in near-α alloy IMI834

P. Wanjara, M. Jahazi, H. Monajati and S. Yue
Materials Science and Engineering: A 416 (1-2) 300 (2006)
https://doi.org/10.1016/j.msea.2005.10.042

Hot working behavior of near-α alloy IMI834

P. Wanjara, M. Jahazi, H. Monajati, S. Yue and J.-P. Immarigeon
Materials Science and Engineering: A 396 (1-2) 50 (2005)
https://doi.org/10.1016/j.msea.2004.12.005

Texture evolution in vacuum arc remelted ingots of Ti-6Al-4V

M.G. Glavicic, P.A. Kobryn, F. Spadafora and S.L. Semiatin
Materials Science and Engineering: A 346 (1-2) 8 (2003)
https://doi.org/10.1016/S0921-5093(02)00525-7

Comparison of the fatigue and fracture of α+β and β titanium alloys

J. O. Peters and G. Lütjering
Metallurgical and Materials Transactions A 32 (11) 2805 (2001)
https://doi.org/10.1007/s11661-001-1031-8

Modelling and prediction of mechanical properties for materials with hexagonal symmetry (zinc, titanium and zirconium alloys)

J.J. Fundenberger, M.J. Philippe, F. Wagner and C. Esling
Acta Materialia 45 (10) 4041 (1997)
https://doi.org/10.1016/S1359-6454(97)00099-2

Study of the β-α phase transformations of a Ti-64 sheet induced from a high-temperature β state and a high-temperature α + β state

H. Moustahfid, N. Gey, M. Humbert and M. J. Philippe
Metallurgical and Materials Transactions A 28 (1) 51 (1997)
https://doi.org/10.1007/s11661-997-0082-x