Free Access
Issue
Matériaux & Techniques
Volume 108, Number 1, 2020
Article Number 101
Number of page(s) 7
DOI https://doi.org/10.1051/mattech/2020013
Published online 07 April 2020
  1. Y. Zhan, G. Zhang, Graphite and SiC hybrid particles reinforced copper composite and its tribological characteristic, J. Mater. Sci. Lett. 22, 1087 (2003) [CrossRef] [Google Scholar]
  2. K. Rajkumar, S. Aravindan, Tribological behavior of microwave processed copper–nanographite composites, Tribol. Int. 57, 282 (2013) [CrossRef] [Google Scholar]
  3. K. Rajkumar, S. Aravindan, M.S. Kulkarni, Wear and life characteristics of microwave-sintered copper-graphite composite, J. Mater. Eng. Perform. 21, 2389 (2012) [CrossRef] [Google Scholar]
  4. I. Rodrigues, M. Guedes, A.C. Ferro, Microstructural changes in copper–graphite–alumina nanocomposites produced by mechanical alloying, Microsc. Microanal. 21, 120 (2015) [CrossRef] [Google Scholar]
  5. H. Cao, Z. Qian, L. Zhang, J. Xiao, K. Zhou, Tribological behavior of Cu matrix composites containing graphite and tungsten disulfide, Tribol. Trans. 57, 1037 (2014) [CrossRef] [Google Scholar]
  6. Z. Tao, Q. Guoa, X. Gaoa, L. Liua, The wettability and interface thermal resistance of copper/graphite system with an addition of chromium, Mater. Chem. Phys. 128, 228 (2011) [CrossRef] [Google Scholar]
  7. M.D. Montasser, J. Kyoo Lim, Manufacturing processes and properties of copper–graphite composites produced by high frequency induction heating sintering, J. Compos. Mater. 41, 2183 (2007) [CrossRef] [Google Scholar]
  8. J. Kovacik, S. Emmer, J. Bielek, L. Kelesi, Effect of composition on friction coefficient of Cu–graphite composites, Wear 265, 417 (2008) [CrossRef] [Google Scholar]
  9. A. Mazloum, J. Kovacik, S. Emmer, I. Sevostianov, Copper–graphite composites: thermal expansion, thermal and electrical conductivities, and crossproperty connections, J. Mater. Sci., 51(17), 7977 (2016) [CrossRef] [Google Scholar]
  10. M. Hussain, S. Khan, P. Sarmah, Optimization of powder metallurgy processing parameters of Al2O3/Cu composite through Taguchi method with Grey relational analysis, J. King Saud Univ. Eng. Sci. (2019) [Google Scholar]
  11. H. Jailani, A. Rajadurai, B. Mohan, A. Kumar, T. Sornakumar, Multi-response optimisation of sintering parameters of Al–Si alloy/fly ash composite using Taguchi method and grey relational analysis, Int. J. Adv. Manuf. Technol. 45(3–4), 362 (2009) [CrossRef] [Google Scholar]
  12. A. Sadeghi, A. Babakhani, S. Zebarjad, H. Mostajabodaveh, Use of grey relational analysis for multi-objective optimisation of NiTiCu shape memory alloy produced by powder metallurgy process, J. Intell. Mater. Syst. Struct. 25(16), 2093 (2014) [CrossRef] [Google Scholar]
  13. F. Puh, T. Segota, Z. Jurkovic, Optimisation of hard turning process parameters with PCBN tool based on the Taguchi method, Tech. Gaz. 19, 415 (2012) [Google Scholar]
  14. N. Senthilkumar, J. Sudha, V. Muthukumar, A grey-fuzzy approach for optimising machining parameters and the approach angle in turning AISI 1045 steel, Adv. Prod. Eng. Manag. 10, 195 (2015) [Google Scholar]
  15. J. Deng, Introduction to grey system theory, J. Grey Syst. 1, 1 (1989) [Google Scholar]
  16. C.C. Tsao, Grey–Taguchi method to optimise the milling parameters of aluminum alloy, Int. J. Adv. Manuf. Technol. 40, 41 (2009) [CrossRef] [Google Scholar]
  17. Y.F. Hsiao, Y.S. Tarng, W.J. Huang, Optimisation of plasma arc welding parameters by using the Taguchi method with the grey relational analysis, Mater. Manuf. Process. 23, 51 (2010) [CrossRef] [Google Scholar]
  18. Y. Zhan, G. Zhang, Y. Wu, Effect of surface metallization of graphite on the tribological properties of copper hybrid composites, Scand. J. Metall. 33, 80 (2004) [CrossRef] [Google Scholar]
  19. K. Rajkumar, S. Aravindan, Microwave sintering of copper graphite composites, J. Mater. Process. Technol. 209, 5601 (2009) [CrossRef] [Google Scholar]
  20. Glenn Kwabena Gyimah, Ping Huang, Dong Chen, Dry sliding studies of porosity on sintered Cu-based brake materials, Trans. Control Mech. Syst. 2, 219 (2013) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.