Issue
Matériaux & Techniques
Volume 107, Number 5, 2019
Materials and Society: The Circular Economy (SAM13)
Article Number 510
Number of page(s) 12
DOI https://doi.org/10.1051/mattech/2020006
Published online 23 March 2020
  1. The making, shaping and treating of steel, 2003, The AISE Steel Foundation, Pittsburgh, PA − Chapter 13 [Google Scholar]
  2. F. Oeters, Metallurgy of steelmaking, Ed. Springer-Verlag, Berlin, 1995 [Google Scholar]
  3. Y. Sahai, T. Emi, Tundish technology for clean steel production, World Scientific Publishing Co., Singapore, 2008 [Google Scholar]
  4. M.J. Cho, I.C. Kim, Simple Tundish mixing model of continuous casting during a grade transition, ISIJ Int. 46(10), 1416–1420 (2006) [CrossRef] [Google Scholar]
  5. M. Alizadeh, H. Edris, A.R. Pishevar, Behavior of mixed grade during the grade transition for different conditions in the slab continuous casting, ISIJ Int. 48(1), 28–37 (2008) [CrossRef] [Google Scholar]
  6. A.K. Sinha, Y. Sahai, Mathematical modeling of inclusion transport and removal in continuous casting tundishes, ISIJ Int. 33(5), 588–594 (1993) [CrossRef] [Google Scholar]
  7. European Steel Commission − Science Research Development, Contract no. 7210-CA/841-431-336-189, Report EUR 19851EN, 2001 [Google Scholar]
  8. X. Huang, B.G. Thomas, Intermixing model of continuous casting during a grade transition, Metall. Met. Trans. B 27, 617–628 (1996) [CrossRef] [Google Scholar]
  9. R. Kumar, A. Maurya, I.H. Siddiqui, P. Jha, Some studies in different shapes of tundish intermixing and flow behavior, IV International Conference on Production and industrial engineering, CPIE-2016, India, Vol. 4., https://www.researchgate.net/publication/311806506, last consulted: 11.4. 2019 [Google Scholar]
  10. B.G. Thomas, Modeling study of intermixing in tundish and strand during a continuous-casting grade transition, Iron Steelmaker (ISS Transaction), Vol. 24, 12, Iron and Steel Society, Warrendale, PA, 1997, pp. 83–96. [Google Scholar]
  11. K. Michalek, K. Gryc, M. Tkadlečková, D. Bocek, Model study of Tundish steel intermixing and operational verification, Arch. Metall. Mater. 57(1), (2012) [CrossRef] [Google Scholar]
  12. I.H. Siddiqui, P.K. Jha, Effect of inflow rate variation on intermixing in a steelmaking Tundish during ladle change-over, Steel Res. Int. 87(6), (2015). DOI: 10.1002/srin.201500210 [Google Scholar]
  13. Krashnavtar, D. Mazumdar, Transient, multiphase simulation of grade intermixing in a Tundish under constant casting rate and validation against physical modeling, JOM 70(10), 2139–2147 (2018) [CrossRef] [Google Scholar]
  14. J.-H. Bi Jing-han, T. Ping, W.N. Guang-hua, D. Ling, S. Gang, Prediction model of intermixing slab length and location in continuous grade transition casting process, Chinese J. Process Eng. 12(2), 271–276 (2012) [Google Scholar]
  15. Zhang, Y. Yang, S. Li, J. Tang, H. Jang, The effect of a dissipative ladle shroud on mixing in Tundish: mathematical and experimental modelling, https://scholars.uow.edu.au/display/publication118430, last consulted: 11.4. 2019 [Google Scholar]
  16. M. Bartosiewicz, A. Cwudziński, Influence of immersion depth of ladle shroud in liquid steel on range of the transition zone for one-strand tundish during continuous casting of steel, https://www.researchgate.net/publication/320515089, last consulted: 11.04. 2019 [Google Scholar]
  17. K. Chattopadhyay, M. Isac, R.I.L. Guthrie, Physical and mathematical modelling to study the effect of ladle shroud misalignment on liquid metal quality in a tundish, ISIJ Int 51(5), 759–768 (2011) [CrossRef] [Google Scholar]
  18. G. Wang, M. Yun, C. Zhang, G. Xiao, Flow mechanism of molten steel in a single-strand slab caster tundish based on the residence time distribution curve and data, ISIJ Int 55(5), 984–992 (2015) [CrossRef] [Google Scholar]
  19. H. Zhang, Q. Fang, S. Deng, C. Liu, H. Ni, Multiphase flow in a five-strand tundish using trumpet ladle shroud during steady-state casting and ladle change-over, Steel Res Int 90(3), (2018). [Google Scholar]
  20. A. Maurya, P.K. Jha, Two-phase analysis of interface level fluctuation in continuous casting mold with electromagnetic stirring, Int. J. Num. Methods Heat Fluid Flow, (2018). DOI: 10.1108/HFF-08-2017-0310 [Google Scholar]
  21. I.H. Siddiqui, M.-H. Kim, Two-phase numerical modeling of grade intermixing in a steelmaking tundish, Metals 1(40), 9 (2019). DOI: 10.3390/met9010040 [Google Scholar]
  22. V. Battaglia, M. De Santis, V. Volponi, M. Zanforlin, Steel quality and transient flow in tundish casting: features and countermeasures through validated modelling, Proceedings of the 4th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM) − METEC InSteelCon® 2011 − Düsseldorf. [Google Scholar]
  23. www.ansys.com, User manual, last consulted 11.4.2019. [Google Scholar]
  24. O. Levenspiel, Chemical reaction engineering, chap. 11, J. Wiley & Sons, New York, 1999 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.